All MIBs › SL12-MIB › relay1PowerupState
relay1PowerupState
Module: SL12-MIB
OID (symbolic): SL12-MIB::relay1PowerupState
OID (numeric): 1.3.6.1.4.1.3052.41.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 0-opened, 1-closed
What is relay1PowerupState?
The state relay #1 is forced into on device power-up: 0 open, 1 closed, used to define a safe default state (e.g. de-energized) in case the unit loses power and restarts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.41.3.1.3 snmpwalk -v2c -c public <target> SL12-MIB::relay1PowerupState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.41.3.1.3.1 snmpget -v2c -c public <target> SL12-MIB::relay1PowerupState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.41.3.1.3.1 i <value>
Start monitoring SL12-series remote site monitoring unit (alarm/firmware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL12-MIB::relay1PowerupState OID value, configure state conditions and alerts, and monitor any SL12-series remote site monitoring unit (alarm/firmware status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| 1.3.6.1.4.1.3052.41 | s412 | S412-MIB |
| 1.3.6.1.4.1.3052.41.3 | relays | S412-MIB |
| 1.3.6.1.4.1.3052.41.3.1 | relay1 | S412-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.41.3.1.3 | relay1PowerupState | SL12-MIB |