All MIBs › SL12-MIB › ptSerialBaudrate
ptSerialBaudrate
Module: SL12-MIB
OID (symbolic): SL12-MIB::ptSerialBaudrate
OID (numeric): 1.3.6.1.4.1.3052.41.6.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 300 600 1200 2400 4800 9600 19200 baud are allowed values
What is ptSerialBaudrate?
The baud rate used for the passthrough serial port; allowed values are 300, 600, 1200, 2400, 4800, 9600, or 19200, which must match the attached serial device's configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.41.6.11 snmpwalk -v2c -c public <target> SL12-MIB::ptSerialBaudrate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.41.6.11.1 snmpget -v2c -c public <target> SL12-MIB::ptSerialBaudrate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.41.6.11.1 i <value>
Start monitoring SL12-series remote site monitoring unit (alarm/firmware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL12-MIB::ptSerialBaudrate OID value, configure state conditions and alerts, and monitor any SL12-series remote site monitoring unit (alarm/firmware status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| 1.3.6.1.4.1.3052.41 | s412 | S412-MIB |
| 1.3.6.1.4.1.3052.41.6 | passthrough | S412-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.41.6.11 | ptSerialBaudrate | SL12-MIB |