All MIBs › SL12-MIB › powerupTrapsend
powerupTrapsend
Module: SL12-MIB
OID (symbolic): SL12-MIB::powerupTrapsend
OID (numeric): 1.3.6.1.4.1.3052.41.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 0-no, 1-yes, send traps for all sensors on powerup
What is powerupTrapsend?
Controls whether the SL12 sends traps for all its sensors immediately after a power-up/reboot (0=no, 1=yes), useful for confirming full sensor status right after an outage or restart.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.41.1.15 snmpwalk -v2c -c public <target> SL12-MIB::powerupTrapsend
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.41.1.15.1 snmpget -v2c -c public <target> SL12-MIB::powerupTrapsend.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.41.1.15.1 i <value>
Start monitoring SL12-series remote site monitoring unit (alarm/firmware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL12-MIB::powerupTrapsend OID value, configure state conditions and alerts, and monitor any SL12-series remote site monitoring unit (alarm/firmware status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| 1.3.6.1.4.1.3052.41 | s412 | S412-MIB |
| 1.3.6.1.4.1.3052.41.1 | device | S412-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.41.1.15 | powerupTrapsend | SL12-MIB |