All MIBs › SL12-MIB › analog2AlarmThreshold
analog2AlarmThreshold
Module: SL12-MIB
OID (symbolic): SL12-MIB::analog2AlarmThreshold
OID (numeric): 1.3.6.1.4.1.3052.41.8.2.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Seconds must be in a range to be an alarm
What is analog2AlarmThreshold?
The number of seconds analog input #2 must remain outside its normal range before an alarm trap is sent, used to debounce brief voltage fluctuations.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.41.8.2.7 snmpwalk -v2c -c public <target> SL12-MIB::analog2AlarmThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.41.8.2.7.1 snmpget -v2c -c public <target> SL12-MIB::analog2AlarmThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.41.8.2.7.1 i <value>
Start monitoring SL12-series remote site monitoring unit (alarm/firmware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL12-MIB::analog2AlarmThreshold OID value, configure state conditions and alerts, and monitor any SL12-series remote site monitoring unit (alarm/firmware status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| 1.3.6.1.4.1.3052.41 | s412 | S412-MIB |
| 1.3.6.1.4.1.3052.41.8 | analog | S412-MIB |
| 1.3.6.1.4.1.3052.41.8.2 | analog2 | S412-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.41.8.2.7 | analog2AlarmThreshold | SL12-MIB |