All MIBs › SL-SONET-APS-MIB › slSonetApsWaitToRestore
slSonetApsWaitToRestore
Module: SL-SONET-APS-MIB
OID (symbolic): SL-SONET-APS-MIB::slSonetApsWaitToRestore
OID (numeric): 1.3.6.1.4.1.4515.1.6.5.1.1.1.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: This object contains interval in minutes to wait before attempting to switch back to working line. Not applicable if the line is configured in non-revertive mode, i.e. protection line will continue to be active, even if failures on the working line are cleared. The framer clears the signal-fault and signal-degrade when APS switch occurs. Please refer to 'slSonetApsRevertive' for description of non-revertive (read-write).
What is slSonetApsWaitToRestore?
A read-create timer (1-12 minutes) setting how long to wait, after the working line's faults clear, before switching back to it; not applicable in non-revertive mode. An admin raises this to avoid rapid flapping back and forth if the working line's condition is intermittently unstable.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4515 | smartoptics | SL-NE-MIB |
| 1.3.6.1.4.1.4515.1 | sitelight | SL-NE-MIB |
| 1.3.6.1.4.1.4515.1.6 | slSonetMib | SL-SONET-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4515.1.6.5 | slSonetApsMib | SL-SONET-APS-MIB |
| 1.3.6.1.4.1.4515.1.6.5.1 | slSonetApsConfig | SL-SONET-APS-MIB |
| 1.3.6.1.4.1.4515.1.6.5.1.1 | slSonetApsConfigTable | SL-SONET-APS-MIB |
| 1.3.6.1.4.1.4515.1.6.5.1.1.1 | slSonetApsConfigEntry | SL-SONET-APS-MIB |
| 1.3.6.1.4.1.4515.1.6.5.1.1.1.7 | slSonetApsWaitToRestore | SL-SONET-APS-MIB |