All MIBs › SL-SONET-APS-MIB › slSonetApsRevertive
slSonetApsRevertive
Module: SL-SONET-APS-MIB
OID (symbolic): SL-SONET-APS-MIB::slSonetApsRevertive
OID (numeric): 1.3.6.1.4.1.4515.1.6.5.1.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: This object is used to configure the APS revertive or nonrevertive option (read-write).
revertive : Will switch the working line back to active state after the Wait-To-restore interval has expired and the working line Signal-Fault/Signal-Degrade has been cleared. Please refer to 'slSonetApsWaitToRestore' for description of Wait-To-Restore interval. nonrevertive : The protection line continues to be the active line, The active line does not switch to the working line.
What is slSonetApsRevertive?
A read-create setting choosing whether the system automatically switches back to the working line after it recovers (revertive(2)) or stays on the protection line indefinitely (nonrevertive(1)). An admin picks nonrevertive(1) when they'd rather manually control when to switch back after a fault.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4515 | smartoptics | SL-NE-MIB |
| 1.3.6.1.4.1.4515.1 | sitelight | SL-NE-MIB |
| 1.3.6.1.4.1.4515.1.6 | slSonetMib | SL-SONET-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4515.1.6.5 | slSonetApsMib | SL-SONET-APS-MIB |
| 1.3.6.1.4.1.4515.1.6.5.1 | slSonetApsConfig | SL-SONET-APS-MIB |
| 1.3.6.1.4.1.4515.1.6.5.1.1 | slSonetApsConfigTable | SL-SONET-APS-MIB |
| 1.3.6.1.4.1.4515.1.6.5.1.1.1 | slSonetApsConfigEntry | SL-SONET-APS-MIB |
| 1.3.6.1.4.1.4515.1.6.5.1.1.1.9 | slSonetApsRevertive | SL-SONET-APS-MIB |