SL-ETH-MIB :: ethConfigStatus

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › SL-ETH-MIB › ethConfigStatus

ethConfigStatus

Module: SL-ETH-MIB

OID (symbolic): SL-ETH-MIB::ethConfigStatus

OID (numeric): 1.3.6.1.4.1.4515.1.1.1.1.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This variable indicates the Line Status of the Ethrenet interface.

The ethConfigStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) simultaneously.

ethConfigNoAlarm must be set if and only if no other flag is set.

The various bit positions are: 1 ethConfigNoAlarm No alarm present 2 ethConfigTransmitFault Optical GbE transceiver transmit fault 4 ethConfigLossOfSignal Optical GbE transceiver signal detect failed 8 ethConfigLinkFail Mac Layer Link failed

What is ethConfigStatus?

A bitmap of simultaneous link alarm conditions on the port: no alarm, optical transmit fault, optical loss-of-signal, or MAC-layer link failure. Admins decode this to distinguish a bad SFP/transceiver problem (transmit fault or loss of signal) from a MAC-layer link failure when troubleshooting a down Ethernet port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4515.1.1.1.1.1.7
snmpwalk -v2c -c public <target> SL-ETH-MIB::ethConfigStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4515.1.1.1.1.1.7.1
snmpget -v2c -c public <target> SL-ETH-MIB::ethConfigStatus.1

Start monitoring Smartoptics SiteLight optical transport equipment, Ethernet service interface (transceiver/auto-neg/PM status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL-ETH-MIB::ethConfigStatus OID value, configure state conditions and alerts, and monitor any Smartoptics SiteLight optical transport equipment, Ethernet service interface (transceiver/auto-neg/PM status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4515smartopticsSL-NE-MIB
1.3.6.1.4.1.4515.1sitelightSL-NE-MIB
1.3.6.1.4.1.4515.1.1slServiceSL-NE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4515.1.1.1slEthernetSL-ETH-MIB
1.3.6.1.4.1.4515.1.1.1.1ethConfigTableSL-ETH-MIB
1.3.6.1.4.1.4515.1.1.1.1.1ethConfigEntrySL-ETH-MIB
1.3.6.1.4.1.4515.1.1.1.1.1.7ethConfigStatusSL-ETH-MIB