SIAE-PMG828-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SIAE-PMG828-MIB

Organization: SIAE MICROELETTRONICA spa

Last Updated: 2014-10-07

Category: Microwave Radio - SIAE MICROELETTRONICA

Description: Monitors SIAE MICROELETTRONICA microwave radio G.828 path performance statistics and threshold violations.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SIAE-PMG828-MIB?

SIAE-PMG828-MIB is a SIAE Microelettronica enterprise MIB for microwave radio link equipment, providing performance monitoring per ITU-T G.828 for radio links and their associated E1 tributary circuits. It exposes performance-counter data such as error-second and severely-errored-second counts, and threshold-violation indicators, gathered over standard 15-minute and 24-hour monitoring intervals as is typical for ITU-T G.826/G.828-style performance monitoring MIBs. Its monitoring focus is transmission performance/software status of the radio link rather than general chassis hardware: it lets an operator detect degraded radio path quality, tributary errors, and threshold crossings that indicate a fading or failing microwave hop. The module explicitly implements the ITU-T G.828 (and related G.826-family) performance-monitoring standard, so it depends conceptually on those ITU-T recommendations for its parameter definitions. It is deployed on SIAE Microelettronica point-to-point microwave radio transmission equipment used in backhaul and transport networks. Engineers can download the SIAE-PMG828-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SIAE-PMG828-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • SIAE Microelettronica microwave radio link/transmission system

Monitoring Examples

No sample objects were provided for this MIB, so specific table/object names cannot be grounded; in the typical G.828 performance-monitoring pattern implied by the module description, an operator would poll current and historical 15-minute/24-hour interval performance registers for error seconds, severely errored seconds, and background block errors on both the radio link and its E1 tributaries, watching for threshold-crossing alarms that indicate a degrading microwave path.

What Can Be Monitored

  • G.828 error seconds
  • severely errored seconds
  • threshold violation alarms
  • E1 tributary performance

This MIB depends on

Related MIBs

Imported Objects

From SIAE-ALARM-MIB

AlarmSeverityCode
AlarmStatus

From SIAE-TREE-MIB

siaeMibOBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus

How to Use in IPNetwork Monitor

Example using pmG828BBECounter OID:

Select an SIAE Microelettronica microwave radio link/transmission system (ITU-T G.828 error-second performance monitoring) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type pmG828BBECounter into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports g828 BBE counter. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Monitors ITU-T G.829 performance metrics for radio links and E1 tributaries in SIAE telecommunications equipment.

Start monitoring SIAE Microelettronica microwave radio link/transmission system (ITU-T G.828 error-second performance monitoring) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SIAE-PMG828-MIB