SHE-SYNC-MIB :: sheSyncSourceAvailabilityType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SHE-SYNC-MIB › sheSyncSourceAvailabilityType

sheSyncSourceAvailabilityType

Module: SHE-SYNC-MIB

OID (symbolic): SHE-SYNC-MIB::sheSyncSourceAvailabilityType

OID (numeric): 1.3.6.1.4.1.231.7.1.2.2.1.15.1.5.1.2

Node type: OBJECT-TYPE

Type: SheSyncSourceType

Access: read-only

Description: The type of the synchronization source of the network element.

Valid Parameters: sheInternalSyncSource -> always available on CXU board sheT3orE1SyncSource -> depends on used PM module, type could not exactly evaluated by NE sheBitsSyncSource -> depends on used PM module sheEthernetSyncSource -> depends on used CXU board type sheTimingOverPacketSyncSource -> depends on used CXU board type (not supported by R2.8) sheT3SyncSource -> depends on used PM module sheE1SyncSource -> depends on used PM module

The type T3 or E1 normaly depend on the used powermodule HW, but new module support both types of clock inputs and the system could not longer distinguish them.

New with R2.8 maintenance: New powermoduls support a type selection for used input clock. Check new parameter of this table if the current clock support a SourceType switching.

What is sheSyncSourceAvailabilityType?

Reports the type of this available synchronization source, such as internal oscillator, T3/E1, BITS, Ethernet, or Timing-over-Packet, depending on installed hardware. The internal oscillator is always available as a fallback even if no external sources are present.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.15.1.5.1.2
snmpwalk -v2c -c public <target> SHE-SYNC-MIB::sheSyncSourceAvailabilityType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.15.1.5.1.2.1
snmpget -v2c -c public <target> SHE-SYNC-MIB::sheSyncSourceAvailabilityType.1

Start monitoring Nokia Siemens Networks SHE DSLAM, fixed-line broadband access equipment (clock source/SSM timing quality) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SHE-SYNC-MIB::sheSyncSourceAvailabilityType OID value, configure state conditions and alerts, and monitor any Nokia Siemens Networks SHE DSLAM, fixed-line broadband access equipment (clock source/SSM timing quality) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.231sniAN-MIB
1.3.6.1.4.1.231.7siemensUnitsAN-MIB
1.3.6.1.4.1.231.7.1oenProductMibsAN-MIB
1.3.6.1.4.1.231.7.1.2anAN-MIB
1.3.6.1.4.1.231.7.1.2.2ppeAN-SHE-MIB
1.3.6.1.4.1.231.7.1.2.2.1sheAN-SHE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.231.7.1.2.2.1.15sheSyncSHE-SYNC-MIB
1.3.6.1.4.1.231.7.1.2.2.1.15.1sheSyncObjectsSHE-SYNC-MIB
1.3.6.1.4.1.231.7.1.2.2.1.15.1.5sheSyncSourceAvailabilityTableSHE-SYNC-MIB
1.3.6.1.4.1.231.7.1.2.2.1.15.1.5.1sheSyncSourceAvailabilityEntrySHE-SYNC-MIB
1.3.6.1.4.1.231.7.1.2.2.1.15.1.5.1.2sheSyncSourceAvailabilityTypeSHE-SYNC-MIB