-- -- she-sync-mib.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 -- Wednesday, June 03, 2009 at 14:31:00 -- -- Start of ClearCase branch-information of current release: -- she-sync-mib.mib /main/she_main_grf/she_r3.0_grf/11 -- End of ClearCase branch-information. -- SHE-SYNC-MIB DEFINITIONS ::= BEGIN IMPORTS she FROM AN-SHE-MIB PhysicalIndex FROM ENTITY-MIB sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity, SheAlarmSevProfileIndex FROM SHE-ALARMING-MIB SheControlStatusType FROM SHE-TC-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC; sheSync MODULE-IDENTITY LAST-UPDATED "200906031500Z" -- June 03, 2009 at 15:00 GMT ORGANIZATION "Nokia Siemens Networks" CONTACT-INFO "Gerd Barchmann COO BCS BBA RD HW1 gerd.barchmann@nsn.com +49 3834 555654" DESCRIPTION "The MIB module for managing the clock sources (timing) of the network element." REVISION "200704051511Z" -- April 05, 2007 at 15:11 GMT DESCRIPTION "Initial version - merge from GPON project." REVISION "200710161100Z" -- October 16, 2007 at 11:00 GMT DESCRIPTION "New release SHE R2.6P support new types of possible sync sources." REVISION "200711271137Z" -- November 27, 2007 at 11:37 GMT DESCRIPTION "Expand support to a configurable sync source table according concept paper SHE R3.0." REVISION "200712121357Z" -- December 12, 2007 at 13:57 GMT DESCRIPTION "Correct SSM-Level definitions." REVISION "200712201309Z" -- December 20, 2007 at 13:09 GMT DESCRIPTION "Redesign synctables after review by systems." REVISION "200803101553Z" -- March 10, 2008 at 15:53 GMT DESCRIPTION "Supported startet now with SHE R2.8." REVISION "200807291006Z" -- July 29, 2008 at 10:06 GMT DESCRIPTION "Add new Alarm if no SSM information is detected for selected sync source (only for sources who will support SSM like sync ethernet - not for T3)." REVISION "200808281114Z" -- August 28, 2008 at 11:14 GMT DESCRIPTION "Correct some descriptions regarding the parameter support started with R2.8 instead of R3.0." REVISION "200810080848Z" -- October 08, 2008 at 08:48 GMT DESCRIPTION "Add comment for used syncSources depending on CXU type. Modify syntax for sheSyncSourceAvailabilityType." REVISION "200902040843Z" -- February 04, 2009 at 08:43 GMT DESCRIPTION "Modify SyncSourceAvailabilityTable - new parameter for configurable clock source types on new power modules. New controlRequest types to configure these power modules." REVISION "200903030840Z" -- March 03, 2009 at 08:40 GMT DESCRIPTION "Add notification for AvailabilityTable update if HW base was changed." REVISION "200903250929Z" -- March 25, 2009 at 09:29 GMT DESCRIPTION "Add new ControlReqResult values for detailed failure codes." REVISION "200906031420Z" -- June 03, 2009 at 14:20 GMT DESCRIPTION "Add new ReqResult-Trap for sourceType modification command." ::= { she 15 } -- -- Type definitions -- SheSyncPriorityType ::= INTEGER (0 | 1..2) SheSyncWaitTimeToRestoreType ::= INTEGER (0..2147483647) SheSyncSourceAlarmStateType ::= INTEGER { sheAlarmCleared(0), sheAlarmPresent(1) } SheSyncAvailabilityIndexType ::= INTEGER (0 | 1..10) SheSyncControlReqType ::= INTEGER { noRequest(1), sheModifySyncSource(101), sheModifySyncWaitTimeToRestore(102), sheModifySyncGlobals(103), sheModifyUsedSyncSource(104), sheSetVaribaleSyncSourceTypeToT3(105), sheSetVaribaleSyncSourceTypeToE1(106), sheSetVaribaleSyncSourceTypeToBits(107) } -- -- Textual conventions -- SheSyncModeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "sheSyncMode values" SYNTAX INTEGER { revertive(1), nonrevertive(2) } SheSyncControlReqResultType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The result type for synchronization control commands." SYNTAX INTEGER { noRequest(1), commExecStarted(5), paramFaulty(11), requestBusy(12), setDataFailed(13), aswTimeout(14), commandFailed(15), commandSucceeded(16), wrongAlarmSeverityIndex(23), clockSourceNotAvailable(24), clockSourceNotAccessible(25), clockModeNotSupported(26), clockSourceTypeModifyNotSupported(27), clockSourceTypeModifyNotPossibleForActiveClocks(28) } SheSyncSourceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used in sheSyncSourceAvailabilityTable to show the type of available clocksources. Only external sources will be shown in that table but the internal oscilator is always available and will be used if no external clocks could be detected or all of them are down. " SYNTAX INTEGER { sheInternalSyncSource(1), sheT3orE1SyncSource(2), sheBitsSyncSource(3), sheEthernetSyncSource(4), sheTimingOverPacketSyncSource(6), sheT3SyncSource(8), sheE1SyncSource(9) } -- -- Node definitions -- sheSyncObjects OBJECT IDENTIFIER ::= { sheSync 1 } sheSyncGlobalObjects OBJECT IDENTIFIER ::= { sheSyncObjects 1 } sheSyncActiveClockSource OBJECT-TYPE SYNTAX SheSyncPriorityType MAX-ACCESS read-only STATUS current DESCRIPTION "The current chosen (active) clock source. Identifies an entry in the SyncSourceTable. 0 means that no syncSource is available or configured and the NE uses the internal clock of the used CXU board. " ::= { sheSyncGlobalObjects 1 } sheSyncWaitTimeToRestore OBJECT-TYPE SYNTAX SheSyncWaitTimeToRestoreType UNITS "100 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "This time has to expire before switch back to a higher clock source after error condition. Unit is 100 ms." ::= { sheSyncGlobalObjects 2 } sheSyncMode OBJECT-TYPE SYNTAX SheSyncModeType MAX-ACCESS read-only STATUS current DESCRIPTION "The used sync - mode. revertive - the highest priority sync source with valid reference is always selected. nonrevertive - the active sync source will always remain active while it is valid. Only if this sync source will be come invalid, a refence switchover to a valid reference with highest priority will be initiated. New parameter with R2.8." DEFVAL { revertive } ::= { sheSyncGlobalObjects 3 } sheSyncLocalClockSSMLevel OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter defines the configured SSM-Level for the local clock. This parameter should be transmitted, if all selected clock sources are failed and the NE uses his own internal clock reference (free run). The level is defined in 16 steps from 0..15, where 0 is the highest quality level. New parameter with R2.8." DEFVAL { 15 } ::= { sheSyncGlobalObjects 4 } sheSyncSourceTable OBJECT-TYPE SYNTAX SEQUENCE OF SheSyncSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The synchronization source table is used to manage synchronization sources and there priorities in the network element. " ::= { sheSyncObjects 2 } sheSyncSourceEntry OBJECT-TYPE SYNTAX SheSyncSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SyncSourceTable. It defines one possible synchronization source of the network element and its priority. Maximum two sources could be selected from SyncSourceAvailabilityTable if CXU_B3 is used. All other CXU types will only accept one table entry!" INDEX { sheSyncSourcePriority } ::= { sheSyncSourceTable 1 } SheSyncSourceEntry ::= SEQUENCE { sheSyncSourcePriority SheSyncPriorityType, sheSyncSourceType SheSyncSourceType, sheSyncSourceHwUnitIndex INTEGER, sheSyncSourceInterfaceNumber Unsigned32, sheSyncSourceAlarmState SheSyncSourceAlarmStateType, sheSyncSourceAlarmSeverityIndex SheAlarmSevProfileIndex, sheSyncSourceSelectedAvailabilityIndex SheSyncAvailabilityIndexType, sheSyncSourceSSMLevel Unsigned32, sheSyncSourceSSMLevelRec Unsigned32 } sheSyncSourcePriority OBJECT-TYPE SYNTAX SheSyncPriorityType MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value to identify the priority of the synchronization source. Used as table index. 0 is not an useful index for that table." ::= { sheSyncSourceEntry 1 } sheSyncSourceType OBJECT-TYPE SYNTAX SheSyncSourceType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The type of the synchronization source of the network element. NOTE: Not longer used with SHE R2.8." ::= { sheSyncSourceEntry 2 } sheSyncSourceHwUnitIndex OBJECT-TYPE SYNTAX INTEGER (-1 | 1..2147483647) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Identifies the hardware unit that contains the synchronization source. If the hardware unit is not equipped, sheSyncSourceHwUnitIndex contains -1. NOTE: Not longer used with SHE R2.8." ::= { sheSyncSourceEntry 3 } sheSyncSourceInterfaceNumber OBJECT-TYPE SYNTAX Unsigned32 (1..72) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of the physical interface of the hardware unit. The interfaces are numbered vendor specific starting with 1 in ascending order. Synchronization interfaces may not be contained in the interface table. NOTE: Not longer used with SHE R2.8." ::= { sheSyncSourceEntry 4 } sheSyncSourceAlarmState OBJECT-TYPE SYNTAX SheSyncSourceAlarmStateType MAX-ACCESS read-only STATUS current DESCRIPTION "An alarm is generated when a clock source can't be used." ::= { sheSyncSourceEntry 5 } sheSyncSourceAlarmSeverityIndex OBJECT-TYPE SYNTAX SheAlarmSevProfileIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This index selects an item in the sheAlarmSeverityProfileTable[]. It is used to assign the reported alarm to a severity." DEFVAL { 1 } ::= { sheSyncSourceEntry 6 } sheSyncSourceSelectedAvailabilityIndex OBJECT-TYPE SYNTAX SheSyncAvailabilityIndexType MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value to identify a available synchronization source (from sheSyncAvailabilityTable) which is used as sync source for the NE. An index value 0 means no source is selected. New parameter with R2.8." ::= { sheSyncSourceEntry 7 } sheSyncSourceSSMLevel OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter defines the configured reference or assigned SSM-Level for this sync source. It should work as reference level only for source types, which supports SSM OAM messages for clock quality evaluation like ToP or syncEthernet. For other sourcetypes it is the assigned SSM-Level which should be used by the input selector for sourceclock quality comparation. The level is defined in 16 steps from 0..15, where 0 is the highest quality level. The sync source will be invalid, if the received SSM level is above the configured reference level. New parameter with R2.8." ::= { sheSyncSourceEntry 8 } sheSyncSourceSSMLevelRec OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter shows the received SSM-Level for this sync source. It is only valid for source types, which supports SSM OAM messages for clock quality evaluation like syncEthernet or ToP. In case of ToP sync sources, the NE will internaly convert the received stratum number (IEEE1588) to an SSM level value according G.781. The level is defined in 16 steps from 0..15, where 0 is the highest quality level. The sync source will be invalid, if the received SSM level is above the configured reference level. New parameter with R2.8. " ::= { sheSyncSourceEntry 9 } sheSyncControlGroup OBJECT IDENTIFIER ::= { sheSyncObjects 3 } sheSyncCgControlReq OBJECT-TYPE SYNTAX SheSyncControlReqType MAX-ACCESS read-write STATUS current DESCRIPTION "sheModifySyncSource (101): sheSyncCgSourcePriority sheSyncCgSourceAlarmSeverityIndex sheModifySyncWaitTimeToRestore (102): sheSyncCgSourceWaitTimeToRestore New commands with R2.8: sheModifySyncGlobals (103): sheSyncCgMode sheSyncCgSourceWaitTimeToRestore sheSyncCgSourceSSMLevel sheModifyUsedSyncSource (104): -> Maximum two sources could be selected from SyncSourceAvailabilityTable if CXU_B3 is used. All other CXU types will only accept one table entry! sheSyncCgSourcePriority sheSyncCgSourceAvailabilityIndex sheSyncCgSourceSSMLevel New commands with R2.8 maintenance: Valid only if clock sources with parameter TypeSelectionPossible == TRUE are available in the system. More then one trap could be send if more then one clock source was reconfigured by only one command. sheSetVaribaleSyncSourceTypeToT3 (105): sheSetVaribaleSyncSourceTypeToE1 (106): sheSetVaribaleSyncSourceTypeToBits (107):" ::= { sheSyncControlGroup 1 } sheSyncCgControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of a control request. " ::= { sheSyncControlGroup 2 } sheSyncCgControlReqResult OBJECT-TYPE SYNTAX SheSyncControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command. " ::= { sheSyncControlGroup 3 } sheSyncCgControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command). " ::= { sheSyncControlGroup 4 } sheSyncCgSourcePriority OBJECT-TYPE SYNTAX SheSyncPriorityType MAX-ACCESS read-write STATUS current DESCRIPTION "A unique value to identify the synchronization source and its priority. Parameter for command sheModifySyncSource and sheModifyUsedSyncSource to select the table entry to be modified. 0 is not a useful index value for these commands." ::= { sheSyncControlGroup 5 } sheSyncCgSourceAlarmSeverityIndex OBJECT-TYPE SYNTAX SheAlarmSevProfileIndex MAX-ACCESS read-write STATUS current DESCRIPTION "This index selects an item in the sheAlarmSeverityProfileTable[]. It is used to assign the reported alarm (clock source can't be used) to a severity." ::= { sheSyncControlGroup 6 } sheSyncCgSourceWaitTimeToRestore OBJECT-TYPE SYNTAX SheSyncWaitTimeToRestoreType UNITS "100 ms" MAX-ACCESS read-write STATUS current DESCRIPTION "This time has to expire before switch back to a higher clock source after error condition. Unit is 100 ms." ::= { sheSyncControlGroup 7 } sheSyncCgMode OBJECT-TYPE SYNTAX SheSyncModeType MAX-ACCESS read-write STATUS current DESCRIPTION "The used sync - mode. revertive - the highest priority sync source with valid reference is always selected. nonrevertive - the active sync source will always remain active while it is valid. Only if this sync source will be come invalid, a refence switchover to a valid reference with highest priority will be initiated. New parameter with R2.8." ::= { sheSyncControlGroup 8 } sheSyncCgSourceSSMLevel OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter defines the configured reference SSM-Level for this sync source. The level is defined in 16 steps from 0..15, where 0 is the highest quality level. New parameter with R2.8." ::= { sheSyncControlGroup 9 } sheSyncCgSourceAvailabilityIndex OBJECT-TYPE SYNTAX SheSyncAvailabilityIndexType MAX-ACCESS read-write STATUS current DESCRIPTION "Select an entry from sheSyncSourceAvailabilityTable to be used as possible sync source for the NE. An index parameter 0 will delete the current used syncSource from the selected priority position without an new entry. New parameter with R2.8." ::= { sheSyncControlGroup 10 } sheSyncNotifications OBJECT IDENTIFIER ::= { sheSyncObjects 4 } sheSyncEvents OBJECT IDENTIFIER ::= { sheSyncNotifications 1 } sheSyncControlResult NOTIFICATION-TYPE OBJECTS { sheSyncCgControlTimeStamp, sheSyncCgSourcePriority, sheSyncCgControlReq, sheSyncCgControlReqResult } STATUS current DESCRIPTION "Notification sent at the end of a long running command. " ::= { sheSyncEvents 1 } sheSyncClockSourceModified NOTIFICATION-TYPE OBJECTS { sheSyncCgControlTimeStamp, sheSyncCgSourcePriority, sheSyncSourceAlarmSeverityIndex } STATUS current DESCRIPTION "This trap is sent when a clock source (entry in the SyncSourceTable) has been modified." ::= { sheSyncEvents 2 } sheSyncWaitTimeToRestoreModified NOTIFICATION-TYPE OBJECTS { sheSyncCgControlTimeStamp, sheSyncWaitTimeToRestore } STATUS current DESCRIPTION "This trap is sent when the WaitTimeToRestore has been modified." ::= { sheSyncEvents 3 } sheSyncActiveClockSourceChanged NOTIFICATION-TYPE OBJECTS { sheSyncCgControlTimeStamp, sheSyncActiveClockSource } STATUS current DESCRIPTION "This trap is sent when the active clock source has changed." ::= { sheSyncEvents 4 } sheSyncGlobalsModified NOTIFICATION-TYPE OBJECTS { sheSyncCgControlTimeStamp, sheSyncWaitTimeToRestore, sheSyncMode, sheSyncLocalClockSSMLevel } STATUS current DESCRIPTION "This trap is sent when the SyncGlobals has been modified. New parameter with R2.8." ::= { sheSyncEvents 5 } sheSyncUsedSyncSourcesModified NOTIFICATION-TYPE OBJECTS { sheSyncCgControlTimeStamp, sheSyncCgSourcePriority, sheSyncCgSourceAvailabilityIndex, sheSyncCgSourceSSMLevel } STATUS current DESCRIPTION "This trap is sent when the used sync source table was reconfigured. New parameter with R2.8." ::= { sheSyncEvents 6 } sheSyncAvailableSyncSourceTypeModified NOTIFICATION-TYPE OBJECTS { sheSyncCgControlTimeStamp, sheSyncSourceAvailabilityType } STATUS current DESCRIPTION "This trap is sent when the types of some available sources were reconfigured. More then one trap could be send if more then one clock source was reconfigured by only one command. New parameter with R2.8 maintenance." ::= { sheSyncEvents 7 } sheSyncAvailabilityTableUpdated NOTIFICATION-TYPE OBJECTS { sheSyncCgControlTimeStamp } STATUS current DESCRIPTION "This trap is sent by the NE if the list of available sync sources change during runtime. That could be happened if power modules with sync source interfaces will be replaced. New parameter with R2.8 maintenance." ::= { sheSyncEvents 8 } sheSyncSourceModifiedReqResult NOTIFICATION-TYPE OBJECTS { sheSyncCgControlReq, sheSyncCgControlTimeStamp, sheSyncCgControlReqResult } STATUS current DESCRIPTION "ReqResult trap for long running command's." ::= { sheSyncEvents 11 } sheSyncAlarms OBJECT IDENTIFIER ::= { sheSyncNotifications 2 } sheSyncClockSourceAlarm NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "An alarm is generated when a clock source can't be used." ::= { sheSyncAlarms 1 } sheSyncClockNoSSMInfoAlarm NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "This alarm is generated when a selected clock source normaly support SSM information, but NO SSM data could be detected. The SSMLevelRec will be set to '1111' in this case. This is only possible for source types, which supports SSM OAM messages for clock quality evaluation like syncEthernet or ToP. New parameter with R2.8." ::= { sheSyncAlarms 2 } sheSyncSourceAvailabilityTable OBJECT-TYPE SYNTAX SEQUENCE OF SheSyncSourceAvailabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The source availability table is used to show the management system which synchronization sources are available in the NE element depending on the used hardware configuration. The table has a fixed number of entries created by the NE. From these table entrys, the list of used clocksources inside the sheSyncSourceTable could be configured. New table supported with R2.8." ::= { sheSyncObjects 5 } sheSyncSourceAvailabilityEntry OBJECT-TYPE SYNTAX SheSyncSourceAvailabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SyncSourceAvailabilityTable. It defines the possible synchronization sources of the network element, depending on the used HW." INDEX { sheSyncSourceAvailabilityIndex } ::= { sheSyncSourceAvailabilityTable 1 } SheSyncSourceAvailabilityEntry ::= SEQUENCE { sheSyncSourceAvailabilityIndex SheSyncAvailabilityIndexType, sheSyncSourceAvailabilityType SheSyncSourceType, sheSyncSourceAvailabilityHwUnitIndex PhysicalIndex, sheSyncSourceAvailabilityInterfaceNumber Unsigned32, sheSyncSourceAvailabilityTypeSelectionPossible TruthValue } sheSyncSourceAvailabilityIndex OBJECT-TYPE SYNTAX SheSyncAvailabilityIndexType MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value to identify a available synchronization source. Used as table index. Value 0 is not a valid index value for this table." ::= { sheSyncSourceAvailabilityEntry 1 } sheSyncSourceAvailabilityType OBJECT-TYPE SYNTAX SheSyncSourceType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the synchronization source of the network element. Valid Parameters: sheInternalSyncSource -> always available on CXU board sheT3orE1SyncSource -> depends on used PM module, type could not exactly evaluated by NE sheBitsSyncSource -> depends on used PM module sheEthernetSyncSource -> depends on used CXU board type sheTimingOverPacketSyncSource -> depends on used CXU board type (not supported by R2.8) sheT3SyncSource -> depends on used PM module sheE1SyncSource -> depends on used PM module The type T3 or E1 normaly depend on the used powermodule HW, but new module support both types of clock inputs and the system could not longer distinguish them. New with R2.8 maintenance: New powermoduls support a type selection for used input clock. Check new parameter of this table if the current clock support a SourceType switching. " ::= { sheSyncSourceAvailabilityEntry 2 } sheSyncSourceAvailabilityHwUnitIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the hardware unit that contains the synchronization source. " ::= { sheSyncSourceAvailabilityEntry 3 } sheSyncSourceAvailabilityInterfaceNumber OBJECT-TYPE SYNTAX Unsigned32 (1..72) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the physical interface of the hardware unit. The interfaces are numbered vendor specific starting with 1 in ascending order. Synchronization interfaces may not be contained in the interface table." ::= { sheSyncSourceAvailabilityEntry 4 } sheSyncSourceAvailabilityTypeSelectionPossible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This status parameter shows, if the type of this clock source entry is fix or could be modified by configuration. This is a new parameter with R2.8 maintenance, where a new power module was introduced, which supports a configurable input selector to choose the SourceClockType out of this range: sheBitsSyncSource or sheT3SyncSource (default) or sheE1SyncSource. Only if clock sources with parameter TypeSelectionPossible == TRUE are available in the system, the new controlRequest commands for type switching could be used." DEFVAL { false } ::= { sheSyncSourceAvailabilityEntry 5 } sheSyncConformance OBJECT IDENTIFIER ::= { sheSyncObjects 6 } sheSyncCompliances OBJECT IDENTIFIER ::= { sheSyncConformance 1 } -- this module sheSyncCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheSyncConfigGroup, sheSyncConfigControlGroup, sheSyncNotificationsGroup } ::= { sheSyncCompliances 1 } sheSyncGroups OBJECT IDENTIFIER ::= { sheSyncConformance 2 } sheSyncConfigGroup OBJECT-GROUP OBJECTS { sheSyncActiveClockSource, sheSyncWaitTimeToRestore, sheSyncSourcePriority, sheSyncSourceAlarmState, sheSyncSourceAlarmSeverityIndex, sheSyncMode, sheSyncSourceSSMLevel, sheSyncSourceAvailabilityIndex, sheSyncSourceAvailabilityType, sheSyncSourceAvailabilityHwUnitIndex, sheSyncLocalClockSSMLevel, sheSyncSourceAvailabilityTypeSelectionPossible, sheSyncSourceAvailabilityInterfaceNumber, sheSyncSourceSelectedAvailabilityIndex, sheSyncSourceSSMLevelRec } STATUS current DESCRIPTION "Description." ::= { sheSyncGroups 1 } sheSyncConfigControlGroup OBJECT-GROUP OBJECTS { sheSyncCgControlReq, sheSyncCgControlStatus, sheSyncCgControlReqResult, sheSyncCgControlTimeStamp, sheSyncCgSourcePriority, sheSyncCgSourceAlarmSeverityIndex, sheSyncCgSourceWaitTimeToRestore, sheSyncCgMode, sheSyncCgSourceSSMLevel, sheSyncCgSourceAvailabilityIndex } STATUS current DESCRIPTION "Description." ::= { sheSyncGroups 2 } sheSyncNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { sheSyncControlResult, sheSyncClockSourceModified, sheSyncWaitTimeToRestoreModified, sheSyncActiveClockSourceChanged, sheSyncClockSourceAlarm, sheSyncUsedSyncSourcesModified, sheSyncGlobalsModified, sheSyncAvailabilityTableUpdated, sheSyncClockNoSSMInfoAlarm, sheSyncAvailableSyncSourceTypeModified, sheSyncSourceModifiedReqResult } STATUS current DESCRIPTION "Description." ::= { sheSyncGroups 3 } sheSyncObsoleteGroup OBJECT-GROUP OBJECTS { sheSyncSourceType, sheSyncSourceHwUnitIndex, sheSyncSourceInterfaceNumber } STATUS obsolete DESCRIPTION "This parameters are not longer supported by SHE R3.0." ::= { sheSyncGroups 4 } END -- -- she-sync-mib.mib --