All MIBs › SHE-GBOND-MIB › sheGBondFltStatus
sheGBondFltStatus
Module: SHE-GBOND-MIB
OID (symbolic): SHE-GBOND-MIB::sheGBondFltStatus
OID (numeric): 1.3.6.1.4.1.231.7.1.2.2.1.26.1.1.6.1.3
Node type: OBJECT-TYPE
Type: SheGBondFltStatusType
Access: read-only
Description: G.Bond (GBS) port Fault Status. This is a bitmap of possible conditions. The various bit positions are: noPeer - peer PHY cannot be reached (e.g. no BCEs attached, all BCEs are Down etc.). peerPowerLoss - peer PHY has indicated impending unit failure due to loss of local power ('Dying Gasp'). bceSubTypeMismatch - local BCEs in the aggregation group are not of the same sub-type, e.g. some BCEs in the local device are -O while others are -R subtype. lowRate - sheGBondUpRate/sheGBondDownRate of the port has reached or dropped below sheGBondThreshLowUpRate/ sheGBondThreshLowUpRate.
This object is intended to supplement ifOperStatus object in IF-MIB.
What is sheGBondFltStatus?
This OID is a bitmap reporting G.Bond port fault conditions such as noPeer (peer PHY unreachable), peerPowerLoss (remote dying-gasp), bceSubTypeMismatch (mixed -O/-R member links), and lowRate (rate dropped below configured threshold), supplementing ifOperStatus. Admins check this bitmap first when a bonded port looks unhealthy, since it pinpoints which specific fault condition is active.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.26.1.1.6.1.3 snmpwalk -v2c -c public <target> SHE-GBOND-MIB::sheGBondFltStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.26.1.1.6.1.3.1 snmpget -v2c -c public <target> SHE-GBOND-MIB::sheGBondFltStatus.1
Start monitoring Nokia Siemens Networks SHE DSLAM, fixed-line broadband access equipment (multi-pair bonded xDSL status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SHE-GBOND-MIB::sheGBondFltStatus OID value, configure state conditions and alerts, and monitor any Nokia Siemens Networks SHE DSLAM, fixed-line broadband access equipment (multi-pair bonded xDSL status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.231 | sni | AN-MIB |
| 1.3.6.1.4.1.231.7 | siemensUnits | AN-MIB |
| 1.3.6.1.4.1.231.7.1 | oenProductMibs | AN-MIB |
| 1.3.6.1.4.1.231.7.1.2 | an | AN-MIB |
| 1.3.6.1.4.1.231.7.1.2.2 | ppe | AN-SHE-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1 | she | AN-SHE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.231.7.1.2.2.1.26 | sheGBondMIB | SHE-GBOND-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.26.1 | sheGBondObjects | SHE-GBOND-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.26.1.1 | sheGBondPort | SHE-GBOND-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.26.1.1.6 | sheGBondPortStatusTable | SHE-GBOND-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.26.1.1.6.1 | sheGBondPortStatusEntry | SHE-GBOND-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.26.1.1.6.1.3 | sheGBondFltStatus | SHE-GBOND-MIB |