All MIBs › SCA-WBR-MIB › wbrTpRxRejDefaultSource

wbrTpRxRejDefaultSource

OID (symbolic): SCA-WBR-MIB::wbrTpRxRejDefaultSource

OID (numeric): 1.3.6.1.4.1.208.49.3.15.1.15

Node type: OBJECT-TYPE

Type: Counter

Access: read-only

Description: Number of packets received on this link which were rejected by the Default Action of the Source Forwarding Table

What is wbrTpRxRejDefaultSource?

This value reports the number of packets received on a specific link that were rejected by the Default Action of the Source Forwarding Table. Admins use it to see, per port, how much source-filtered traffic falls through to the default policy.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.208.49.3.15.1.15
snmpwalk -v2c -c public <target> SCA-WBR-MIB::wbrTpRxRejDefaultSource

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.208.49.3.15.1.15.1
snmpget -v2c -c public <target> SCA-WBR-MIB::wbrTpRxRejDefaultSource.1

Start monitoring wireless bridge equipment (spanning-tree/BPDU-spoofing detection status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SCA-WBR-MIB::wbrTpRxRejDefaultSource OID value, configure state conditions and alerts, and monitor any wireless bridge equipment (spanning-tree/BPDU-spoofing detection status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.208	scanet	SCANET-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.208.49	wbr	SCA-WBR-MIB
1.3.6.1.4.1.208.49.3	wbrTp	SCA-WBR-MIB
1.3.6.1.4.1.208.49.3.15	wbrTpTable	SCA-WBR-MIB
1.3.6.1.4.1.208.49.3.15.1	wbrTpEntry	SCA-WBR-MIB
1.3.6.1.4.1.208.49.3.15.1.15	wbrTpRxRejDefaultSource	SCA-WBR-MIB

SCA-WBR-MIB :: wbrTpRxRejDefaultSource

wbrTpRxRejDefaultSource

Module

This MIB depends on