All MIBs › SCA-WBR-MIB › wbrStpTopologyChangeAck

wbrStpTopologyChangeAck

OID (symbolic): SCA-WBR-MIB::wbrStpTopologyChangeAck

OID (numeric): 1.3.6.1.4.1.208.49.2.10.1.13

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Determines if the configuration change is to be forwarded to the Bridges on the Designated Ports (via Configuration BPDUs) - 'Yes' or 'No'

What is wbrStpTopologyChangeAck?

This value reports whether a topology-change acknowledgment is pending to be forwarded via Configuration BPDUs on a specific link. Admins use it when tracing how a topology change notification is propagating through the bridged network.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.208.49.2.10.1.13
snmpwalk -v2c -c public <target> SCA-WBR-MIB::wbrStpTopologyChangeAck

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.208.49.2.10.1.13.1
snmpget -v2c -c public <target> SCA-WBR-MIB::wbrStpTopologyChangeAck.1

Start monitoring wireless bridge equipment (spanning-tree/BPDU-spoofing detection status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SCA-WBR-MIB::wbrStpTopologyChangeAck OID value, configure state conditions and alerts, and monitor any wireless bridge equipment (spanning-tree/BPDU-spoofing detection status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.208	scanet	SCANET-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.208.49	wbr	SCA-WBR-MIB
1.3.6.1.4.1.208.49.2	wbrStp	SCA-WBR-MIB
1.3.6.1.4.1.208.49.2.10	wbrStpTable	SCA-WBR-MIB
1.3.6.1.4.1.208.49.2.10.1	wbrStpEntry	SCA-WBR-MIB
1.3.6.1.4.1.208.49.2.10.1.13	wbrStpTopologyChangeAck	SCA-WBR-MIB

SCA-WBR-MIB :: wbrStpTopologyChangeAck

wbrStpTopologyChangeAck

Module

This MIB depends on