All MIBs › SCA-WBR-MIB › wbrStpSpoofing
wbrStpSpoofing
Module: SCA-WBR-MIB
OID (symbolic): SCA-WBR-MIB::wbrStpSpoofing
OID (numeric): 1.3.6.1.4.1.208.49.2.10.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: If Spoofing is enabled in Setup
What is wbrStpSpoofing?
This value reports whether the BPDU/data spoofing feature is enabled in setup for the bridge overall. Admins check it as the master switch that governs whether the per-link spoofing behavior reported elsewhere in the table can occur at all.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.208.49.2.10.1.18 snmpwalk -v2c -c public <target> SCA-WBR-MIB::wbrStpSpoofing
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.208.49.2.10.1.18.1 snmpget -v2c -c public <target> SCA-WBR-MIB::wbrStpSpoofing.1
Start monitoring wireless bridge equipment (spanning-tree/BPDU-spoofing detection status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SCA-WBR-MIB::wbrStpSpoofing OID value, configure state conditions and alerts, and monitor any wireless bridge equipment (spanning-tree/BPDU-spoofing detection status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.208 | scanet | SCANET-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.208.49 | wbr | SCA-WBR-MIB |
| 1.3.6.1.4.1.208.49.2 | wbrStp | SCA-WBR-MIB |
| 1.3.6.1.4.1.208.49.2.10 | wbrStpTable | SCA-WBR-MIB |
| 1.3.6.1.4.1.208.49.2.10.1 | wbrStpEntry | SCA-WBR-MIB |
| 1.3.6.1.4.1.208.49.2.10.1.18 | wbrStpSpoofing | SCA-WBR-MIB |