All MIBs › SCA-IPROUTER-MIB › natIntAddr
natIntAddr
Module: SCA-IPROUTER-MIB
OID (symbolic): SCA-IPROUTER-MIB::natIntAddr
OID (numeric): 1.3.6.1.4.1.208.42.1.3.1.3
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: The Internal IP Address of the NAT entry.
What is natIntAddr?
The internal (private-side) IP address of this NAT mapping, i.e. the address as seen on the LAN before translation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.208.42.1.3.1.3 snmpwalk -v2c -c public <target> SCA-IPROUTER-MIB::natIntAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.208.42.1.3.1.3.1 snmpget -v2c -c public <target> SCA-IPROUTER-MIB::natIntAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.208.42.1.3.1.3.1 a <value>
Start monitoring Securicor Arisoft WAN routers (per-link IP configuration/protocol traffic statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SCA-IPROUTER-MIB::natIntAddr OID value, configure state conditions and alerts, and monitor any Securicor Arisoft WAN routers (per-link IP configuration/protocol traffic statistics) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.208 | scanet | SCANET-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.208.42 | iprouter | SCA-IPROUTER-MIB |
| 1.3.6.1.4.1.208.42.1 | conf | SCA-IPROUTER-MIB |
| 1.3.6.1.4.1.208.42.1.3 | natTable | SCA-IPROUTER-MIB |
| 1.3.6.1.4.1.208.42.1.3.1 | natEntry | SCA-IPROUTER-MIB |
| 1.3.6.1.4.1.208.42.1.3.1.3 | natIntAddr | SCA-IPROUTER-MIB |