SC5520-MIB :: sc5520SysUpTime

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsSC5520-MIBsc5520SysUpTime

sc5520SysUpTime

Module: SC5520-MIB

OID (symbolic): SC5520-MIB::sc5520SysUpTime

OID (numeric): 1.3.6.1.4.1.498.8.3.5.1.4

Node type: OBJECT-TYPE

Type: TimeTicks

Access: read-only

Description: This variable is used to report the elapsed system tick time for conversion to real time at the controller and is not related to the sysUpTime referenced in MIB-II. Upon power-up of the unit, the elapsed time is cleared. The elapsed time counter rolls over upon reaching the maximum count.

What is sc5520SysUpTime?

An elapsed-time tick counter local to this SC5520's controller (distinct from the standard MIB-II sysUpTime), cleared at power-up and used to derive real time; it rolls over on reaching its maximum count.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.8.3.5.1.4
snmpwalk -v2c -c public <target> SC5520-MIB::sc5520SysUpTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.498.8.3.5.1.4.1
snmpget -v2c -c public <target> SC5520-MIB::sc5520SysUpTime.1

Start monitoring General DataComm SC5520 DSU/CSU (loopback/DTE-interface configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SC5520-MIB::sc5520SysUpTime OID value, configure state conditions and alerts, and monitor any General DataComm SC5520 DSU/CSU (loopback/DTE-interface configuration) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.498gdcGDC7616-MIB
1.3.6.1.4.1.498.8dsuDDS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.498.8.3sc5520SC5520-MIB
1.3.6.1.4.1.498.8.3.5sc5520MaintTableSC5520-MIB
1.3.6.1.4.1.498.8.3.5.1sc5520MaintEntrySC5520-MIB
1.3.6.1.4.1.498.8.3.5.1.4sc5520SysUpTimeSC5520-MIB