All MIBs › SC5520-MIB › sc5520RateBroadcast

sc5520RateBroadcast

OID (symbolic): SC5520-MIB::sc5520RateBroadcast

OID (numeric): 1.3.6.1.4.1.498.8.3.2.1.21

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This should only be enabled when adding a remote unit and the Line Type is either DDSII with data rate equal to 56k or 64k Clear Channel.

What is sc5520RateBroadcast?

A write-only trigger, enabled only while adding a new remote unit on a DDSII 56k or 64k Clear Channel line, that broadcasts the configured data rate so the new remote can synchronize to it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.8.3.2.1.21
snmpwalk -v2c -c public <target> SC5520-MIB::sc5520RateBroadcast

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.498.8.3.2.1.21.1
snmpget -v2c -c public <target> SC5520-MIB::sc5520RateBroadcast.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.498.8.3.2.1.21.1 i <value>

Start monitoring General DataComm SC5520 DSU/CSU (loopback/DTE-interface configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SC5520-MIB::sc5520RateBroadcast OID value, configure state conditions and alerts, and monitor any General DataComm SC5520 DSU/CSU (loopback/DTE-interface configuration) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.498	gdc	GDC7616-MIB
1.3.6.1.4.1.498.8	dsu	DDS-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.498.8.3	sc5520	SC5520-MIB
1.3.6.1.4.1.498.8.3.2	sc5520UnitCfgTable	SC5520-MIB
1.3.6.1.4.1.498.8.3.2.1	sc5520UnitCfgEntry	SC5520-MIB
1.3.6.1.4.1.498.8.3.2.1.21	sc5520RateBroadcast	SC5520-MIB

SC5520-MIB :: sc5520RateBroadcast

sc5520RateBroadcast

Module

This MIB depends on