SC5520-MIB :: sc5520DtePortType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsSC5520-MIBsc5520DtePortType

sc5520DtePortType

Module: SC5520-MIB

OID (symbolic): SC5520-MIB::sc5520DtePortType

OID (numeric): 1.3.6.1.4.1.498.8.3.2.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The value auto(3), indicates that the DTE port is automatically being detected, and set. The rs232(1), will force the DTE port to EIA/TIA-232-E, and v35(2), will force the DTE port to V.35.

What is sc5520DtePortType?

Selects the electrical interface used on the DTE port: forced to RS-232, forced to V.35, or auto(3) to let the unit automatically detect and set the interface type.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.8.3.2.1.6
snmpwalk -v2c -c public <target> SC5520-MIB::sc5520DtePortType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.498.8.3.2.1.6.1
snmpget -v2c -c public <target> SC5520-MIB::sc5520DtePortType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.498.8.3.2.1.6.1 i <value>

Start monitoring General DataComm SC5520 DSU/CSU (loopback/DTE-interface configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SC5520-MIB::sc5520DtePortType OID value, configure state conditions and alerts, and monitor any General DataComm SC5520 DSU/CSU (loopback/DTE-interface configuration) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.498gdcGDC7616-MIB
1.3.6.1.4.1.498.8dsuDDS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.498.8.3sc5520SC5520-MIB
1.3.6.1.4.1.498.8.3.2sc5520UnitCfgTableSC5520-MIB
1.3.6.1.4.1.498.8.3.2.1sc5520UnitCfgEntrySC5520-MIB
1.3.6.1.4.1.498.8.3.2.1.6sc5520DtePortTypeSC5520-MIB