All MIBs › SC5520-MIB › sc5520DiagExtDataloop
sc5520DiagExtDataloop
Module: SC5520-MIB
OID (symbolic): SC5520-MIB::sc5520DiagExtDataloop
OID (numeric): 1.3.6.1.4.1.498.8.3.7.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: To initiate a Dataloop test with no Selftest SET this object and specifiy external, this will allow the data from the DTE attached to the far end unit (nms520) to looped back to itself. Emun external(3) is write only. The only valid response to a READ is dataloopOn(2) or dataloopOff(1). To halt this test you must SET the sc5520DiagTestReset object. Reading test results via the sc5520DiagBitErrors or sc5520DiagBlockErrors objects while the test is running will also cause the test to terminate. There are no test results associated with this test. Reading test status on the remote unit via nms520DiagTestStatus may interfere with the diagonostic test pattern generated from the terminal equiptment.
What is sc5520DiagExtDataloop?
Setting this to external(3) starts a data loopback with no self-test pattern, looping the far-end (remote) unit's DTE data back to itself; the read-only dataloopOn(2)/dataloopOff(1) values report status, and the test is stopped via sc5520DiagTestReset or by reading the bit/block error counters.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.8.3.7.1.4 snmpwalk -v2c -c public <target> SC5520-MIB::sc5520DiagExtDataloop
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.8.3.7.1.4.1 snmpget -v2c -c public <target> SC5520-MIB::sc5520DiagExtDataloop.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.8.3.7.1.4.1 i <value>
Start monitoring General DataComm SC5520 DSU/CSU (loopback/DTE-interface configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SC5520-MIB::sc5520DiagExtDataloop OID value, configure state conditions and alerts, and monitor any General DataComm SC5520 DSU/CSU (loopback/DTE-interface configuration) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | GDC7616-MIB |
| 1.3.6.1.4.1.498.8 | dsu | DDS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.8.3 | sc5520 | SC5520-MIB |
| 1.3.6.1.4.1.498.8.3.7 | sc5520ExcDiagTable | SC5520-MIB |
| 1.3.6.1.4.1.498.8.3.7.1 | sc5520ExcDiagEntry | SC5520-MIB |
| 1.3.6.1.4.1.498.8.3.7.1.4 | sc5520DiagExtDataloop | SC5520-MIB |