SBE-MIB :: wanPortNumber

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SBE-MIB › wanPortNumber

wanPortNumber

Module: SBE-MIB

OID (symbolic): SBE-MIB::wanPortNumber

OID (numeric): 1.3.6.1.4.1.1055.2.5.1.2.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Default value on nX: ascending integer, one for each hardware WAN port: 1, 2, 3A, 3B, 4A, and 4B. On nX: both ram and flash, field trial 1

This field is used to identify the Wan port to which the information in this row of the table applies.

What is wanPortNumber?

The index identifying which physical WAN port (numbered 1 through 18, e.g. '1', '2', '3A', '3B') a row of wanPortTable describes. An admin reads this alongside the other WAN port objects to know which physical connector a given setting applies to.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1055.2.5.1.2.2
snmpwalk -v2c -c public <target> SBE-MIB::wanPortNumber

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1055.2.5.1.2.2.1
snmpget -v2c -c public <target> SBE-MIB::wanPortNumber.1

Start monitoring SBE-series network router/appliance (system identity/boot state/license activation level) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SBE-MIB::wanPortNumber OID value, configure state conditions and alerts, and monitor any SBE-series network router/appliance (system identity/boot state/license activation level) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1055sbeIPF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1055.2routerSBE-MIB
1.3.6.1.4.1.1055.2.5wanSBE-MIB
1.3.6.1.4.1.1055.2.5.1wanPortTableSBE-MIB
1.3.6.1.4.1.1055.2.5.1.2wanPortEntrySBE-MIB
1.3.6.1.4.1.1055.2.5.1.2.2wanPortNumberSBE-MIB