All MIBs › SBE-MIB › wanIpxRipSendInterval
wanIpxRipSendInterval
Module: SBE-MIB
OID (symbolic): SBE-MIB::wanIpxRipSendInterval
OID (numeric): 1.3.6.1.4.1.1055.2.5.1.2.23
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Default value on nX: 60 On nX: both ram and flash, field trial 2
If IPX is configured, this object determines time, in seconds, between nX broadcasts of the IPX RIP destination information in its routing tables. If the value equals 0, RIP transmissions are not sent.
What is wanIpxRipSendInterval?
Sets how often, in seconds (default 60), this port broadcasts its IPX routes via RIP, with 0 disabling transmissions. An admin would raise this interval on a low-bandwidth WAN link to reduce recurring IPX routing chatter.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1055.2.5.1.2.23 snmpwalk -v2c -c public <target> SBE-MIB::wanIpxRipSendInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1055.2.5.1.2.23.1 snmpget -v2c -c public <target> SBE-MIB::wanIpxRipSendInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1055.2.5.1.2.23.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> wanIpxRipSendInterval.1
Start monitoring SBE-series network router/appliance (system identity/boot state/license activation level) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SBE-MIB::wanIpxRipSendInterval OID value, configure state conditions and alerts, and monitor any SBE-series network router/appliance (system identity/boot state/license activation level) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1055 | sbe | IPF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1055.2 | router | SBE-MIB |
| 1.3.6.1.4.1.1055.2.5 | wan | SBE-MIB |
| 1.3.6.1.4.1.1055.2.5.1 | wanPortTable | SBE-MIB |
| 1.3.6.1.4.1.1055.2.5.1.2 | wanPortEntry | SBE-MIB |
| 1.3.6.1.4.1.1055.2.5.1.2.23 | wanIpxRipSendInterval | SBE-MIB |