All MIBs › SBE-MIB › syDialbackRetryInterval
syDialbackRetryInterval
Module: SBE-MIB
OID (symbolic): SBE-MIB::syDialbackRetryInterval
OID (numeric): 1.3.6.1.4.1.1055.2.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This item specifies the number of seconds to pause before the next dialback call from Soho will be made. Default = 10
What is syDialbackRetryInterval?
Sets how many seconds (10-120, default 10) the unit waits before retrying a dialback call after a failed attempt. An admin might raise this if the remote modem needs more recovery time between hang-up and re-dial.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1055.2.1.14 snmpwalk -v2c -c public <target> SBE-MIB::syDialbackRetryInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1055.2.1.14.1 snmpget -v2c -c public <target> SBE-MIB::syDialbackRetryInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1055.2.1.14.1 i <value>
Start monitoring SBE-series network router/appliance (system identity/boot state/license activation level) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SBE-MIB::syDialbackRetryInterval OID value, configure state conditions and alerts, and monitor any SBE-series network router/appliance (system identity/boot state/license activation level) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1055 | sbe | IPF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1055.2 | router | SBE-MIB |
| 1.3.6.1.4.1.1055.2.1 | routsys | SBE-MIB |
| 1.3.6.1.4.1.1055.2.1.14 | syDialbackRetryInterval | SBE-MIB |