SBE-MIB :: snmpIpServerStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SBE-MIB › snmpIpServerStatus

snmpIpServerStatus

Module: SBE-MIB

OID (symbolic): SBE-MIB::snmpIpServerStatus

OID (numeric): 1.3.6.1.4.1.1055.2.10.3.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Indication of whether or not a valid entry.

What is snmpIpServerStatus?

The RowStatus column for an entry in the SNMP IP trap-server table, which holds up to three IP addresses that should receive all SNMP traps generated by this unit. An admin adds a network-management station's IP here so it starts receiving the unit's traps.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1055.2.10.3.1.1
snmpwalk -v2c -c public <target> SBE-MIB::snmpIpServerStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1055.2.10.3.1.1.1
snmpget -v2c -c public <target> SBE-MIB::snmpIpServerStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1055.2.10.3.1.1.1 i <value>

Start monitoring SBE-series network router/appliance (system identity/boot state/license activation level) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SBE-MIB::snmpIpServerStatus OID value, configure state conditions and alerts, and monitor any SBE-series network router/appliance (system identity/boot state/license activation level) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1055sbeIPF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1055.2routerSBE-MIB
1.3.6.1.4.1.1055.2.10snmpSBE-MIB
1.3.6.1.4.1.1055.2.10.3snmpIpServerTableSBE-MIB
1.3.6.1.4.1.1055.2.10.3.1snmpIpServerEntrySBE-MIB
1.3.6.1.4.1.1055.2.10.3.1.1snmpIpServerStatusSBE-MIB