SBE-MIB :: destDialoutProtoSupport

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SBE-MIB › destDialoutProtoSupport

destDialoutProtoSupport

Module: SBE-MIB

OID (symbolic): SBE-MIB::destDialoutProtoSupport

OID (numeric): 1.3.6.1.4.1.1055.2.6.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Default value on nX: 0 On nX: both ram and flash,

This item is a bit encoded value representing various protocols to be enabled during the establishment of a WAN connection. The encoded values are: IP(1), IPX(2), Bridging(4), NetBIOS/IPX(8), IPBCASTFWD(16). Any combination of IP, IPX and Bridging is valid. NetBIOS/IPX is valid only if IPX bit is set. IPBCASTFWD is valid only if IP bit is set. Value zero is invalid

What is destDialoutProtoSupport?

A bitmask selecting which protocols get enabled when this WAN connection is established -- IP(1), IPX(2), Bridging(4), NetBIOS/IPX(8), IPBCASTFWD(16) -- where NetBIOS/IPX only applies if the IPX bit is also set and IPBCASTFWD only applies if the IP bit is set. An admin sets this to 5 (IP+Bridging) to route IP while also bridging non-routable traffic to this destination.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1055.2.6.1.1.5
snmpwalk -v2c -c public <target> SBE-MIB::destDialoutProtoSupport

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1055.2.6.1.1.5.1
snmpget -v2c -c public <target> SBE-MIB::destDialoutProtoSupport.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1055.2.6.1.1.5.1 i <value>

Start monitoring SBE-series network router/appliance (system identity/boot state/license activation level) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SBE-MIB::destDialoutProtoSupport OID value, configure state conditions and alerts, and monitor any SBE-series network router/appliance (system identity/boot state/license activation level) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1055sbeIPF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1055.2routerSBE-MIB
1.3.6.1.4.1.1055.2.6destinationSBE-MIB
1.3.6.1.4.1.1055.2.6.1destTableSBE-MIB
1.3.6.1.4.1.1055.2.6.1.1destEntrySBE-MIB
1.3.6.1.4.1.1055.2.6.1.1.5destDialoutProtoSupportSBE-MIB