All MIBs › SANMgrV2-MIB › pdReset
pdReset
Module: SANMgrV2-MIB
OID (symbolic): SANMgrV2-MIB::pdReset
OID (numeric): 1.3.6.1.4.1.2935.3.1.1.22
Node type: OBJECT-TYPE
Type: Reset
Access: read-write
Description: Generic device reset if supported. Write reset(1) here to reset device if supported by Gateway firmware and device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2935.3.1.1.22 snmpwalk -v2c -c public <target> SANMgrV2-MIB::pdReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2935.3.1.1.22.1 snmpget -v2c -c public <target> SANMgrV2-MIB::pdReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2935.3.1.1.22.1 s <value>
Start monitoring Pathlight/ADIC SAN Data Gateway appliance (health-check/event-log/front-panel identify) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SANMgrV2-MIB::pdReset OID value, configure state conditions and alerts, and monitor any Pathlight/ADIC SAN Data Gateway appliance (health-check/event-log/front-panel identify) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2935 | pathlight | SANMgrV2-MIB |
| 1.3.6.1.4.1.2935.3 | devices | SANMgrV2-MIB |
| 1.3.6.1.4.1.2935.3.1 | pdDevices | SANMgrV2-MIB |
| 1.3.6.1.4.1.2935.3.1.1 | pdDevEntry | SANMgrV2-MIB |
| 1.3.6.1.4.1.2935.3.1.1.22 | pdReset | SANMgrV2-MIB |