SAMSUNG-PRINTER-EXT-MIB :: scmPrtConfigurationAltitudeAction

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › SAMSUNG-PRINTER-EXT-MIB › scmPrtConfigurationAltitudeAction

scmPrtConfigurationAltitudeAction

Module: SAMSUNG-PRINTER-EXT-MIB

OID (symbolic): SAMSUNG-PRINTER-EXT-MIB::scmPrtConfigurationAltitudeAction

OID (numeric): 1.3.6.1.4.1.236.11.5.11.55.19.1.7

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The value 'low(1)' will be used when the printer is in the low altitude location. The value 'high(2)' will be used when the printer is in the high altitude location.

What is scmPrtConfigurationAltitudeAction?

Tells the printer whether it is operating at a low(1) or high(2) altitude location, which the print engine uses to adjust internal parameters (such as fuser temperature or airflow) for correct operation. Admins set this once during installation of a printer at a high-elevation site to avoid print-quality issues caused by thinner air.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.236.11.5.11.55.19.1.7
snmpwalk -v2c -c public <target> SAMSUNG-PRINTER-EXT-MIB::scmPrtConfigurationAltitudeAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.236.11.5.11.55.19.1.7.1
snmpget -v2c -c public <target> SAMSUNG-PRINTER-EXT-MIB::scmPrtConfigurationAltitudeAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.236.11.5.11.55.19.1.7.1 i <value>

Start monitoring Samsung network printers, multifunction printers (MFPs) (consumables/tray/job status extension) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SAMSUNG-PRINTER-EXT-MIB::scmPrtConfigurationAltitudeAction OID value, configure state conditions and alerts, and monitor any Samsung network printers, multifunction printers (MFPs) (consumables/tray/job status extension) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.236samsungSAMSUNG-COMMON-MIB
1.3.6.1.4.1.236.11divisionSAMSUNG-COMMON-MIB
1.3.6.1.4.1.236.11.5oadivisionSAMSUNG-COMMON-MIB
1.3.6.1.4.1.236.11.5.11samsungCommonMIBSAMSUNG-COMMON-MIB
Numeric OIDNameModule
1.3.6.1.4.1.236.11.5.11.55scmPrintMIBSAMSUNG-PRINTER-EXT-MIB
1.3.6.1.4.1.236.11.5.11.55.19scmPrtConfigurationSAMSUNG-PRINTER-EXT-MIB
1.3.6.1.4.1.236.11.5.11.55.19.1scmPrtConfigurationSimpleSAMSUNG-PRINTER-EXT-MIB
1.3.6.1.4.1.236.11.5.11.55.19.1.7scmPrtConfigurationAltitudeActionSAMSUNG-PRINTER-EXT-MIB