All MIBs › SA-CM-MIB › vendorLINKLEDTreatment
vendorLINKLEDTreatment
Module: SA-CM-MIB
OID (symbolic): SA-CM-MIB::vendorLINKLEDTreatment
OID (numeric): 1.3.6.1.4.1.1429.77.1.2.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This MIB will determine Link Speed using blink rate for DOCSIS 2.0 modems or using LED color for DOCSIS 3.0 Modems as seen with the LINK LED.
default: LINK LED behavior follows standard behavior as defined per User Guide
FOR DOCSIS 2.0 1: showlinkspeed: When connected, LED blinks 1x/2sec for 10/100 operation and blinks 2x/1sec for Gigabit operation. Traffic is still reflected as 2x/1sec.
FOR DOCSIS 3.0 On dual LED D3.0 modems the operator can choose to have 10/100 operation indicated by either a green LED or an amber LED. Modems that support 1000 Mb speeds shall indicate using the alternate LED.
2: d3Greenledslowspeed indicates 10/100 operation using the Green LED. 3: d3Amberledslowspeed indicates 10/100 operation using the Amber LED.
What is vendorLINKLEDTreatment?
Controls how the LINK LED represents Ethernet link speed: on DOCSIS 2.0 modems this changes the blink rate (e.g. showlinkspeed(1) blinks once every 2 seconds for 10/100 and twice a second for Gigabit), while on DOCSIS 3.0 dual-LED modems it instead picks which color represents 10/100 versus Gigabit (d3Greenledslowspeed(2) or d3Amberledslowspeed(3)); default(0) follows standard user-guide behavior.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1429.77.1.2.8 snmpwalk -v2c -c public <target> SA-CM-MIB::vendorLINKLEDTreatment
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1429.77.1.2.8.1 snmpget -v2c -c public <target> SA-CM-MIB::vendorLINKLEDTreatment.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1429.77.1.2.8.1 i <value>
Start monitoring Cisco/Scientific Atlanta DOCSIS cable modems (vendor-specific LED/IGMP/DHCP/ARP configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SA-CM-MIB::vendorLINKLEDTreatment OID value, configure state conditions and alerts, and monitor any Cisco/Scientific Atlanta DOCSIS cable modems (vendor-specific LED/IGMP/DHCP/ARP configuration) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1429 | ciscoSPVTG | CISCO-DMN-DSG-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1429.77 | saCmMib | SA-CM-MIB |
| 1.3.6.1.4.1.1429.77.1 | dpxCmMibObjects | SA-CM-MIB |
| 1.3.6.1.4.1.1429.77.1.2 | cmVendorInfo | SA-CM-MIB |
| 1.3.6.1.4.1.1429.77.1.2.8 | vendorLINKLEDTreatment | SA-CM-MIB |