All MIBs › SA-CM-MIB › saPUFScanNow
saPUFScanNow
Module: SA-CM-MIB
OID (symbolic): SA-CM-MIB::saPUFScanNow
OID (numeric): 1.3.6.1.4.1.1429.77.1.10.1.1.5
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Setting an index of this object to true(1) causes the modem to immediately go offline and scan for the frequency stored in saPUFFrequency.x. The results and timestamp of the scan are stored to non-vol. After the scan takes place the modem re-inits the CM mac and re-registers. Conditions to run the scan: - saPUFRowStatus.x must be set to active for a scan to take place. - The scan will not take place if a provisioned line is offhook. - If this mib is added to the CM config file, a scan will not take place unless the current time from TOD server is > 360 seconds (6 minutes) from the last scan time stored in saPUFScanTimestamp.x. This mib object returns false(2) when read if no scan was initiated
What is saPUFScanNow?
Writing true to this row triggers the modem to immediately go offline and scan the frequency in saPUFFrequency for that row, recording the result and timestamp to non-volatile memory before re-initializing and re-registering; the scan only actually runs if the row is active, no line is off-hook, and (if set via config file) at least 6 minutes have passed since the last scan on that row. Reading it back always returns false if no scan was triggered.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1429.77.1.10.1.1.5 snmpwalk -v2c -c public <target> SA-CM-MIB::saPUFScanNow
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1429.77.1.10.1.1.5.1 snmpget -v2c -c public <target> SA-CM-MIB::saPUFScanNow.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1429.77.1.10.1.1.5.1 s <value>
Start monitoring Cisco/Scientific Atlanta DOCSIS cable modems (vendor-specific LED/IGMP/DHCP/ARP configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SA-CM-MIB::saPUFScanNow OID value, configure state conditions and alerts, and monitor any Cisco/Scientific Atlanta DOCSIS cable modems (vendor-specific LED/IGMP/DHCP/ARP configuration) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1429 | ciscoSPVTG | CISCO-DMN-DSG-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1429.77 | saCmMib | SA-CM-MIB |
| 1.3.6.1.4.1.1429.77.1 | dpxCmMibObjects | SA-CM-MIB |
| 1.3.6.1.4.1.1429.77.1.10 | saPUF | SA-CM-MIB |
| 1.3.6.1.4.1.1429.77.1.10.1 | saPUFTable | SA-CM-MIB |
| 1.3.6.1.4.1.1429.77.1.10.1.1 | saPUFEntry | SA-CM-MIB |
| 1.3.6.1.4.1.1429.77.1.10.1.1.5 | saPUFScanNow | SA-CM-MIB |