SA-CM-MIB :: cmEthernetIfAdminOverride

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsSA-CM-MIBcmEthernetIfAdminOverride

cmEthernetIfAdminOverride

Module: SA-CM-MIB

OID (symbolic): SA-CM-MIB::cmEthernetIfAdminOverride

OID (numeric): 1.3.6.1.4.1.1429.77.1.4.42

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: For RG Mode enabling this MIB forces the index values of cmEthernetifAdminStatus.x stored in non-vol into ifAdminStatus.x For Bridge Mode the ports are exclusively controlled by cmEthernetifAdminStatus.x and ifAdminStatus.x has no direct mapping and is overridden. This MIB is written to non-vol and survives a reboot. A factory reset sets MIB index values back to disable(0).

What is cmEthernetIfAdminOverride?

Enables (1) or disables (0, the default) whether the per-port values stored in cmEthernetIfAdminStatus actually get applied to ifAdminStatus for each Ethernet port; in Bridge Mode, enabling this makes cmEthernetIfAdminStatus the sole controller of port state, overriding ifAdminStatus directly. The setting survives reboots and resets to disabled on a factory reset.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1429.77.1.4.42
snmpwalk -v2c -c public <target> SA-CM-MIB::cmEthernetIfAdminOverride

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1429.77.1.4.42.1
snmpget -v2c -c public <target> SA-CM-MIB::cmEthernetIfAdminOverride.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1429.77.1.4.42.1 i <value>

Start monitoring Cisco/Scientific Atlanta DOCSIS cable modems (vendor-specific LED/IGMP/DHCP/ARP configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SA-CM-MIB::cmEthernetIfAdminOverride OID value, configure state conditions and alerts, and monitor any Cisco/Scientific Atlanta DOCSIS cable modems (vendor-specific LED/IGMP/DHCP/ARP configuration) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1429ciscoSPVTGCISCO-DMN-DSG-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1429.77saCmMibSA-CM-MIB
1.3.6.1.4.1.1429.77.1dpxCmMibObjectsSA-CM-MIB
1.3.6.1.4.1.1429.77.1.4cmInterfaceInfoSA-CM-MIB
1.3.6.1.4.1.1429.77.1.4.42cmEthernetIfAdminOverrideSA-CM-MIB