All MIBs › S5-TOKENRING-MIB › s5TrRingInfoRingState
s5TrRingInfoRingState
Module: S5-TOKENRING-MIB
OID (symbolic): S5-TOKENRING-MIB::s5TrRingInfoRingState
OID (numeric): 1.3.6.1.4.1.45.1.6.7.3.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current status of this ring. The states are: normalOperation(1).........ring operating without any interruption. ringPurge(2)...............Active monitor enters the ring purge state whenever a token error is detected. monitorContention(3).......ring enters in monitor contention state whenever the ring stations need to establish an active monitor. beaconFrameStreaming(4)....station which participates in monitor contention and has monitor contention timeout expired, receives multiple claim tokens and cannot solve the contention within one second. beaconBitStreaming(5)......station which participates in monitor contention, has 'monitor timeout' and does not receive any claim token. beaconRingSignalLoss(6)....station which has 'contention timeout' and participates in monitor contention and detects the loss of incoming signal. beaconSetRecoveryMode(7)...station before acting as a recovery station sends out beacon frame with a recovery mode bit set.
What is s5TrRingInfoRingState?
This reports the ring's current operating state per IEEE 802.5: normalOperation, ringPurge, monitorContention, or one of several beaconing sub-states (beaconFrameStreaming, beaconBitStreaming, beaconRingSignalLoss, beaconSetRecoveryMode) each corresponding to a specific fault-recovery condition described in the MIB. An admin watches for any state other than normalOperation as an active-fault indicator, and the specific beaconing sub-state pinpoints what recovery phase the ring is in.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.6.7.3.1.1.9 snmpwalk -v2c -c public <target> S5-TOKENRING-MIB::s5TrRingInfoRingState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.6.7.3.1.1.9.1 snmpget -v2c -c public <target> S5-TOKENRING-MIB::s5TrRingInfoRingState.1
Start monitoring Bay Networks/SynOptics S5000-series Token Ring hardware (ring state/beacon/monitor-contention status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S5-TOKENRING-MIB::s5TrRingInfoRingState OID value, configure state conditions and alerts, and monitor any Bay Networks/SynOptics S5000-series Token Ring hardware (ring state/beacon/monitor-contention status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6 | series5000 | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6.7 | s5Tok | S5-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.6.7.3 | s5TrRing | S5-TOKENRING-MIB |
| 1.3.6.1.4.1.45.1.6.7.3.1 | s5TrRingInfoTable | S5-TOKENRING-MIB |
| 1.3.6.1.4.1.45.1.6.7.3.1.1 | s5TrRingInfoEntry | S5-TOKENRING-MIB |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.9 | s5TrRingInfoRingState | S5-TOKENRING-MIB |