All MIBs › S5-COMMON-STATS-MIB › s5CmSNodeStatus
s5CmSNodeStatus
Module: S5-COMMON-STATS-MIB
OID (symbolic): S5-COMMON-STATS-MIB::s5CmSNodeStatus
OID (numeric): 1.3.6.1.4.1.45.1.6.5.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of the MAC address for a station. The meaning varies depending on the media type of the NMM reporting the status. The values are: other(1)......unknown or other active(2).....the station is actively sending and receiving, or participating in the ring poll inactive(3)...the station is idle
For Ethernet, active(2) means that the station has sent a frame in the last N seconds and inactive(3) means the station has not sent a frame in the last N seconds. N is specified by the s5EnNodeInactInterval object, which is defined in the 5000 Ethernet MIB. The status of other(3) is reported when the current status of the station is unknown.
For Token Ring and FDDI, the status of a station will always be reported as active(2) since it is based on being in the ring poll. When no longer in the ring poll, a station is removed from the table.
What is s5CmSNodeStatus?
This enumerated value reports whether the detected station is other(1), active(2), or inactive(3), with the meaning depending on the media type reporting it. On Ethernet, active(2) means the station sent a frame within the last N seconds (per s5EnNodeInactInterval) while inactive(3) means it hasn't, whereas on Token Ring or FDDI a station is always active(2) while in the ring poll and simply disappears from the table once it drops out. An admin watching a station flip from active(2) to inactive(3) on an Ethernet segment knows that host has stopped transmitting recently.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.6.5.1.1.1.5 snmpwalk -v2c -c public <target> S5-COMMON-STATS-MIB::s5CmSNodeStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.6.5.1.1.1.5.1 snmpget -v2c -c public <target> S5-COMMON-STATS-MIB::s5CmSNodeStatus.1
Start monitoring Nortel/Avaya BayStack switch, Nortel Centillion switching platform (node/forwarding statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S5-COMMON-STATS-MIB::s5CmSNodeStatus OID value, configure state conditions and alerts, and monitor any Nortel/Avaya BayStack switch, Nortel Centillion switching platform (node/forwarding statistics) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6 | series5000 | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6.5 | s5Com | S5-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.6.5.1 | s5CmStat | S5-COMMON-STATS-MIB |
| 1.3.6.1.4.1.45.1.6.5.1.1 | s5CmSNodeTable | S5-COMMON-STATS-MIB |
| 1.3.6.1.4.1.45.1.6.5.1.1.1 | s5CmSNodeEntry | S5-COMMON-STATS-MIB |
| 1.3.6.1.4.1.45.1.6.5.1.1.1.5 | s5CmSNodeStatus | S5-COMMON-STATS-MIB |