All MIBs › S5-AGENT-MIB › s5AgentScriptParameters
s5AgentScriptParameters
Module: S5-AGENT-MIB
OID (symbolic): S5-AGENT-MIB::s5AgentScriptParameters
OID (numeric): 1.3.6.1.4.1.45.1.6.4.13.1.1.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This object is used to specify the agent script parameters, as strings separated by ';' character. If the string for a parameter is left empty (e.g '42;;255.255.0.0;', ';182.168.1.1;'), the parameter is set to its default value or, if it has none, the parameter is ignored. The value provided with s5AgentScriptParameters must contain the exact number of string parameters (default or not), as described below in each instance of a script. When running a script with its default configuration (this means setting s5AgentScriptRun to default(1) value), s5AgentScriptParameters is modified automatically with the default parameters. For ip-office(1) instance of the script table, the parameters list is: Voice VLAN ID; Voice VLAN gateway IP; Voice VLAN gateway mask; Data VLAN ID; Data VLAN Gateway IP; Data VLAN Gateway mask; IP Route to Gateway Modem-Router; IP Office Call-Server IP; IP Office File Server IP. (e.g. '42;192.168.42.254;255.255.255.0;44;192.168.44.254;255.255.255.0;192.168.44.2;192.168.42.1;192.168.42.1;'). For lldp(2) instance of the script table, the parameters list is: Data VLAN ID; Management VLAN flag; Data VLAN gateway IP; Data VLAN gateway mask; Data VLAN Uplink ports; Management IP address; Management IP mask; Default IP Route; Voice VLAN ID; Voice VLAN gateway IP; Voice VLAN gateway mask; LLDP Call Server IP; LLDP File Server IP; The parameter 'Management VLAN flag' describes whether the data vlan becomes the management vlan (1) or not (0). The following parameters are mandatory: Voice VLAN ID, LLDP Call Server IP, LLDP File Server IP. Management VLAN flag and Data VLAN Uplink ports are mandatory when the Data VLAN is selected. Default IP Route must be introduced when the Management VLAN is changed and an IP mask is mandatory when the corresponding IP address parameter is configured. (e.g. 44;1;192.168.44.254;255.255.255.0;1/23,1/24;192.168.1.1;255.255.255.0;192.168.44.2;42;192.168.42.254;255.255.255.0; 192.168.42.1;192.168.42.1;'). For adac(3) instance of the script table, the parameters list is: Data VLAN ID; Management VLAN flag; Data VLAN gateway IP; Data VLAN gateway mask; Management IP address; Management IP mask; Default IP Route; Voice VLAN ID; Voice VLAN gateway IP; Voice VLAN gateway mask; LLDP Call Server IP; LLDP File Server IP; Uplink trunk flag; ADAC Uplink ports; ADAC Call Server ports; ADAC Telephony ports. The parameter 'Management VLAN flag' describes whether the data vlan becomes the management vlan (1) or not (0). The 'Uplink trunk flag' indicates whether the ports in the 'ADAC Uplink ports' parameter become members of a MLT trunk (1) or not (0). The following parameters are mandatory: Voice VLAN ID, LLDP Call Server IP, LLDP File Server IP, Uplink trunk flag, ADAC Uplink ports, ADAC Call Server ports, ADAC Telephony ports. Management VLAN flag is mandatory when the Data VLAN is selected. Default IP Route must be introduced when the Management VLAN is changed and an IP mask is mandatory when the corresponding IP address parameter is configured. (e.g.'44;1;192.168.44.254;255.255.255.0;192.168.1.1;255.255.255.0;192.168.44.2;42;192.168.42.254;255.255.255.0; 192.168.42.1;192.168.42.1;1;1/23-24;1/1;1/2-22;') The voice(4) instance of the script table is unsupported.
What is s5AgentScriptParameters?
A semicolon-separated parameter string configuring one of the built-in setup scripts (ip-office, lldp, or adac), e.g. VLAN IDs, gateway addresses, and server IPs specific to that script; leaving a field empty falls back to its default (or is ignored if it has none), and setting s5AgentScriptRun to default(1) auto-populates this object with that script's default parameter set.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.6.4.13.1.1.2 snmpwalk -v2c -c public <target> S5-AGENT-MIB::s5AgentScriptParameters
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.6.4.13.1.1.2.1 snmpget -v2c -c public <target> S5-AGENT-MIB::s5AgentScriptParameters.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.6.4.13.1.1.2.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> s5AgentScriptParameters.1
Start monitoring Avaya/Nortel/Bay Networks S5000 series switch/hub (SNMP agent firmware/reboot control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S5-AGENT-MIB::s5AgentScriptParameters OID value, configure state conditions and alerts, and monitor any Avaya/Nortel/Bay Networks S5000 series switch/hub (SNMP agent firmware/reboot control) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6 | series5000 | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6.4 | s5Agent | S5-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.6.4.13 | s5AgentScript | S5-AGENT-MIB |
| 1.3.6.1.4.1.45.1.6.4.13.1 | s5AgentScriptTable | S5-AGENT-MIB |
| 1.3.6.1.4.1.45.1.6.4.13.1.1 | s5AgentScriptEntry | S5-AGENT-MIB |
| 1.3.6.1.4.1.45.1.6.4.13.1.1.2 | s5AgentScriptParameters | S5-AGENT-MIB |