S5-AGENT-MIB :: s5AgTrapFilterGlobalStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › S5-AGENT-MIB › s5AgTrapFilterGlobalStatus

s5AgTrapFilterGlobalStatus

Module: S5-AGENT-MIB

OID (symbolic): S5-AGENT-MIB::s5AgTrapFilterGlobalStatus

OID (numeric): 1.3.6.1.4.1.45.1.6.4.2.12

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This value is the status of all the traps that supported by this trap-filter system.

If the value is 1 (enable all) , all traps in the system are enabled. If the value is 2 (disable all), all traps in the system are disabled. If the value is 3 (enable-all-and-use-table) all traps are enabled except for traps that are disabled in the s5AgTrapFilterTable are disabled. If the value is 4 (disable-all-and-use-table) all traps are disabled except for traps that are enabled in the s5AgTrapFilterTable are enabled.

What is s5AgTrapFilterGlobalStatus?

A master override for the entire trap-filter system: enable-all(1) and disable-all(2) unconditionally turn every trap on or off, while enable-all-and-use-table(3) enables everything except traps individually disabled in s5AgTrapFilterTable, and disable-all-and-use-table(4) is the mirror image, disabling everything except traps individually enabled there.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.6.4.2.12
snmpwalk -v2c -c public <target> S5-AGENT-MIB::s5AgTrapFilterGlobalStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.6.4.2.12.1
snmpget -v2c -c public <target> S5-AGENT-MIB::s5AgTrapFilterGlobalStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.6.4.2.12.1 i <value>

Start monitoring Avaya/Nortel/Bay Networks S5000 series switch/hub (SNMP agent firmware/reboot control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S5-AGENT-MIB::s5AgTrapFilterGlobalStatus OID value, configure state conditions and alerts, and monitor any Avaya/Nortel/Bay Networks S5000 series switch/hub (SNMP agent firmware/reboot control) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.45synopticsCMU-MIB
1.3.6.1.4.1.45.1productsSYNOPTICS-ROOT-MIB
1.3.6.1.4.1.45.1.6series5000SYNOPTICS-ROOT-MIB
1.3.6.1.4.1.45.1.6.4s5AgentS5-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.45.1.6.4.2s5AgentInfoS5-AGENT-MIB
1.3.6.1.4.1.45.1.6.4.2.12s5AgTrapFilterGlobalStatusS5-AGENT-MIB