S5-AGENT-MIB :: s5AgIpDefaultRtrSelectionMode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › S5-AGENT-MIB › s5AgIpDefaultRtrSelectionMode

s5AgIpDefaultRtrSelectionMode

Module: S5-AGENT-MIB

OID (symbolic): S5-AGENT-MIB::s5AgIpDefaultRtrSelectionMode

OID (numeric): 1.3.6.1.4.1.45.1.6.4.2.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The method used to select a default IP router. The following value is read-only: other(1).......not applicable or other case The following values are read-write: config(2).....use configured primary default router. If no primary default router is specified, there will be no default IP route. static(3).....A default router will be chose from the routers known to be up and that have been configured. dynamic(4)....ICMP router discovery as per RFC 1256 is performed and the router with the highest preference level is chosen as default router.

What is s5AgIpDefaultRtrSelectionMode?

Selects how the agent chooses its default IP router: config(2) always uses the configured primary default router (or none if unset), static(3) picks from routers known to be up among the configured set, or dynamic(4) performs ICMP Router Discovery per RFC 1256 and picks the highest-preference responder; dynamic is the default.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.6.4.2.5
snmpwalk -v2c -c public <target> S5-AGENT-MIB::s5AgIpDefaultRtrSelectionMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.6.4.2.5.1
snmpget -v2c -c public <target> S5-AGENT-MIB::s5AgIpDefaultRtrSelectionMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.6.4.2.5.1 i <value>

Start monitoring Avaya/Nortel/Bay Networks S5000 series switch/hub (SNMP agent firmware/reboot control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S5-AGENT-MIB::s5AgIpDefaultRtrSelectionMode OID value, configure state conditions and alerts, and monitor any Avaya/Nortel/Bay Networks S5000 series switch/hub (SNMP agent firmware/reboot control) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.45synopticsCMU-MIB
1.3.6.1.4.1.45.1productsSYNOPTICS-ROOT-MIB
1.3.6.1.4.1.45.1.6series5000SYNOPTICS-ROOT-MIB
1.3.6.1.4.1.45.1.6.4s5AgentS5-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.45.1.6.4.2s5AgentInfoS5-AGENT-MIB
1.3.6.1.4.1.45.1.6.4.2.5s5AgIpDefaultRtrSelectionModeS5-AGENT-MIB