S5-AGENT-MIB :: s5AgInfoLoadProtocolNxtBoot

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › S5-AGENT-MIB › s5AgInfoLoadProtocolNxtBoot

s5AgInfoLoadProtocolNxtBoot

Module: S5-AGENT-MIB

OID (symbolic): S5-AGENT-MIB::s5AgInfoLoadProtocolNxtBoot

OID (numeric): 1.3.6.1.4.1.45.1.6.4.2.1.15

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The transport protocol(s) over which the agent is to use to load the configuration information and the agent image at the next boot of the agent. The following value is read-only: other(1)....unknown or some other protocol

The following values are read-write: ipOnly(2)....use load protocol over IP ipxOnly(3)...use load protocol over IPX auto(4)......try using the IP load function and if that fails then use IPX load function. If the IPX load function also fails, repeat the same process until one or the other protocol succeeds.

What is s5AgInfoLoadProtocolNxtBoot?

Selects which transport(s) the agent uses to load its configuration and firmware image at the next boot; auto(4) tries IP first and falls back to IPX (and keeps alternating) until one succeeds, useful when the admin isn't sure which network stack will be reachable at boot time.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.6.4.2.1.15
snmpwalk -v2c -c public <target> S5-AGENT-MIB::s5AgInfoLoadProtocolNxtBoot

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.6.4.2.1.15.1
snmpget -v2c -c public <target> S5-AGENT-MIB::s5AgInfoLoadProtocolNxtBoot.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.6.4.2.1.15.1 i <value>

Start monitoring Avaya/Nortel/Bay Networks S5000 series switch/hub (SNMP agent firmware/reboot control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S5-AGENT-MIB::s5AgInfoLoadProtocolNxtBoot OID value, configure state conditions and alerts, and monitor any Avaya/Nortel/Bay Networks S5000 series switch/hub (SNMP agent firmware/reboot control) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.45synopticsCMU-MIB
1.3.6.1.4.1.45.1productsSYNOPTICS-ROOT-MIB
1.3.6.1.4.1.45.1.6series5000SYNOPTICS-ROOT-MIB
1.3.6.1.4.1.45.1.6.4s5AgentS5-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.45.1.6.4.2s5AgentInfoS5-AGENT-MIB
1.3.6.1.4.1.45.1.6.4.2.1s5AgentGblS5-AGENT-MIB
1.3.6.1.4.1.45.1.6.4.2.1.15s5AgInfoLoadProtocolNxtBootS5-AGENT-MIB