All MIBs › S5-AGENT-MIB › s5AgInfoFileAction
s5AgInfoFileAction
Module: S5-AGENT-MIB
OID (symbolic): S5-AGENT-MIB::s5AgInfoFileAction
OID (numeric): 1.3.6.1.4.1.45.1.6.4.2.1.24
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to copy a config file or an image file. Typically, the copy is to/from a TFTP server, though other types of sources/destinations are possible.
In read operation, if no action taken since the boot up, it will return other(1). Otherwise it will return the latest action such as dnldConfig(2), dnldImg(3), upldConfig(4) and upldImg(5).
In write operation, the values that can be written are:
dnldConfig(2) ........... download a config file to a device. The new config file will not take effect until the next boot cycle of the device. dnldImg(3) .............. download an image to a device. upldConfig(4) ........... upload a config file to a server from a device. The config file contains the current MIB object values of the device. upldImg(5) .............. upload a image from a device to a server dnldFw(6) ............... download firmware to a device upldFw(7) ............... upload firware from a device to a server dnldImgIfNewer(8) ....... download an image to a device if the image version is newer than the image stored in local NV storage dnldImgToDram(9) ........ download an image to a device, but do not save it to NVRAM, just keep it in DRAM dnldImgNoReset(10) ...... download an image to a device, but do not reset the device after the download dnldFwNoReset(11) ....... download firmware to a device, but do not reset the device after the download dnldImgFromUsb(12) ...... download image from USB port upldImgToUsb(13) ........ upload image to USB port dnldFwFromUsb(14) ....... download firmware from USB port upldFwToUsb(15) ......... upload firmware to USB port dnldConfigFromUsb(16) ... download binary config from USB port upldConfigToUsb(17) ..... upload binary config to USB port dnldLicense(18) ......... download license file from TFTP server upldLicense(19) ......... upload license file to TFTP server dnldLicenseFromUsb(20) .. download license file from USB port upldLicenseToUsb(21) .... upload license file to USB port copyConfigToNvram(22) ... copy the current running configuration into NVRAM dnldSshDsaAuthKeyFromUsb(23) .. download SSH DSA authentication key from USB port dnldImgFromSftp(24) ..... download image from SFTP server dnldFwFromSftp(25) ...... download firmware from SFTP server dnldConfigFromSftp(26) .. download a binary config file from SFTP server upldConfigToSftp(27) .... upload a binary config file to SFTP server dnldSshRsaAuthKeyFromUsb(28) .. download SSH RSA authentication key from USB port dnldSshDsaAuthKeyFromSftp(29) .. download SSH DSA authentication key from SFTP server dnldSshRsaAuthKeyFromSftp(30).. download SSH RSA authentication key from SFTP server dnldImgFromSftpNoReset(31) .. download image from SFTP server, but do not reset the device after the download dnldFwFromSftpNoReset(32) .. download firmware from SFTP server, but do not reset the device after the download dnldLicenseFromSftp(33) .. download license file from SFTP server dnldImgFromUsbNoReset(34).. download image from USB, but do not reset the device after the download. dnldImgIfNewerNoReset(35) ..download an image to a device if the image is newer than the image stored in the local NV storage, but do not reset the device after download dnldImgIfNewerFromUsb(36) ..download an image from usb port to a device if the image is newer than the image stored in the local NV storage dnldImgIfNewerFromUsbNoReset(37) ..download an image from usb port to a device if the image is newer than the image stored in the local NV storage, but do not reset the device after download dnldImgIfNewerFromSftp(38) ..download an image from SFTP server if the image is newer than the image stored in the local NV storage dnldImgIfNewerFromSftpNoReset(39) ..download an image from SFTP server if the image is newer than the image stored in the local NV storage, but do not reset the device after download.
What is s5AgInfoFileAction?
A large action code that triggers a file transfer such as downloading a config or firmware image, uploading the running config, or moving license/SSH-key files, over TFTP, SFTP, or USB, with variants that skip the post-download device reset; reading it (when nothing has run since boot) returns other(1), otherwise the most recent action performed, such as dnldConfig(2) or upldImg(5).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.6.4.2.1.24 snmpwalk -v2c -c public <target> S5-AGENT-MIB::s5AgInfoFileAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.6.4.2.1.24.1 snmpget -v2c -c public <target> S5-AGENT-MIB::s5AgInfoFileAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.6.4.2.1.24.1 i <value>
Start monitoring Avaya/Nortel/Bay Networks S5000 series switch/hub (SNMP agent firmware/reboot control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S5-AGENT-MIB::s5AgInfoFileAction OID value, configure state conditions and alerts, and monitor any Avaya/Nortel/Bay Networks S5000 series switch/hub (SNMP agent firmware/reboot control) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6 | series5000 | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6.4 | s5Agent | S5-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.6.4.2 | s5AgentInfo | S5-AGENT-MIB |
| 1.3.6.1.4.1.45.1.6.4.2.1 | s5AgentGbl | S5-AGENT-MIB |
| 1.3.6.1.4.1.45.1.6.4.2.1.24 | s5AgInfoFileAction | S5-AGENT-MIB |