All MIBs › S5-AGENT-MIB › s5AgInfoCfgLoadMode
s5AgInfoCfgLoadMode
Module: S5-AGENT-MIB
OID (symbolic): S5-AGENT-MIB::s5AgInfoCfgLoadMode
OID (numeric): 1.3.6.1.4.1.45.1.6.4.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The source from which to load configuration information at next boot. The following value is read-only: other(1)...not applicable or some other case
The following values are read-write: local(2).....get from local storage net(3).......load from the network locAsBk(4)...try using network and if it fails then use local information.
When local(2) is specified, the configuration information is loaded from local storage. If the local configuration is not valid (checks for ip = 0.0.0.0), then BOOTP is used for the IP stack. (In IPX only mode, the IP address could be 0.0.0.0 and IPX does not rely on the IP address. The agent checks the IPX address, and if the network number of the IPX address is equal to 0 the agent uses SAP).
When net(3) is specified, the configuration information will be downloaded from the network only. The configuration information will never be loaded from local storage, even if downloading fails and the local configuration information exists.
When locAsBk(4) is specified, a download of the configuration information will be tried over the network. If the network download fails then the configuration information will be loaded from local storage.
What is s5AgInfoCfgLoadMode?
Chooses the source for loading configuration information at next boot: local(2) from local storage (falling back to BOOTP if the local IP is 0.0.0.0), net(3) always from the network with no local fallback, or locAsBk(4) which tries the network first and falls back to local storage if that download fails.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.6.4.2.1.6 snmpwalk -v2c -c public <target> S5-AGENT-MIB::s5AgInfoCfgLoadMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.6.4.2.1.6.1 snmpget -v2c -c public <target> S5-AGENT-MIB::s5AgInfoCfgLoadMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.6.4.2.1.6.1 i <value>
Start monitoring Avaya/Nortel/Bay Networks S5000 series switch/hub (SNMP agent firmware/reboot control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S5-AGENT-MIB::s5AgInfoCfgLoadMode OID value, configure state conditions and alerts, and monitor any Avaya/Nortel/Bay Networks S5000 series switch/hub (SNMP agent firmware/reboot control) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6 | series5000 | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6.4 | s5Agent | S5-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.6.4.2 | s5AgentInfo | S5-AGENT-MIB |
| 1.3.6.1.4.1.45.1.6.4.2.1 | s5AgentGbl | S5-AGENT-MIB |
| 1.3.6.1.4.1.45.1.6.4.2.1.6 | s5AgInfoCfgLoadMode | S5-AGENT-MIB |