All MIBs › S5-AGENT-MIB › s5AgInfoBootMode
s5AgInfoBootMode
Module: S5-AGENT-MIB
OID (symbolic): S5-AGENT-MIB::s5AgInfoBootMode
OID (numeric): 1.3.6.1.4.1.45.1.6.4.2.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The source for initial protocol configuration information at next boot. For IP, a setting of net(3), netWhenNeeded(4), or netOrLastAddress(5) means that BOOTP will be used to get the agent's IP address(es), load server address, and configuration file name.
For IPX, a setting of net(3), netWhenNeeded(4), or netOrLastAddress(5) means SAP will be used to get the agent's Novell network number(s), and the configuation filename will be loaded from local storage (note - the load server address is not needed in a Novell network).
The following value is read-only: other(1).....not applicable or some other case
The following values are read-write: local(2) Don't use the network. net(3) Try using the network and if that fails then use protocol configuration information from local storage. netWhenNeeded(4) Use protocol configuration information from local storage if available, otherwise, try using the network. netOrLastAddress(5) Similar to netWhenNeeded, except that if using the network fails, the last set of protocol configuration information that was obtained using the network will be used if it is available.
Note: The load server address is not configurable and is not available in this MIB object on a Novell network.
What is s5AgInfoBootMode?
Chooses where the agent gets its initial IP/IPX addressing and configuration-file location at next boot: local(2) skips the network entirely, net(3) always tries BOOTP/SAP first, netWhenNeeded(4) prefers local storage and falls back to the network, and netOrLastAddress(5) additionally remembers the last network-obtained configuration as a fallback if a fresh network attempt fails.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.6.4.2.1.5 snmpwalk -v2c -c public <target> S5-AGENT-MIB::s5AgInfoBootMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.6.4.2.1.5.1 snmpget -v2c -c public <target> S5-AGENT-MIB::s5AgInfoBootMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.6.4.2.1.5.1 i <value>
Start monitoring Avaya/Nortel/Bay Networks S5000 series switch/hub (SNMP agent firmware/reboot control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S5-AGENT-MIB::s5AgInfoBootMode OID value, configure state conditions and alerts, and monitor any Avaya/Nortel/Bay Networks S5000 series switch/hub (SNMP agent firmware/reboot control) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6 | series5000 | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6.4 | s5Agent | S5-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.6.4.2 | s5AgentInfo | S5-AGENT-MIB |
| 1.3.6.1.4.1.45.1.6.4.2.1 | s5AgentGbl | S5-AGENT-MIB |
| 1.3.6.1.4.1.45.1.6.4.2.1.5 | s5AgInfoBootMode | S5-AGENT-MIB |