All MIBs › S412-MIB › tempHighLevel
tempHighLevel
Module: S412-MIB
OID (symbolic): S412-MIB::tempHighLevel
OID (numeric): 1.3.6.1.4.1.3052.41.4.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Level at which the High alarm goes active
What is tempHighLevel?
The temperature threshold above which the 'High' temperature alarm becomes active. Set this to the point where rising heat first warrants attention, e.g. an early-warning threshold before a critical shutdown level.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.41.4.3 snmpwalk -v2c -c public <target> S412-MIB::tempHighLevel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.41.4.3.1 snmpget -v2c -c public <target> S412-MIB::tempHighLevel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.41.4.3.1 i <value>
Start monitoring S412 series remote monitoring/alarm unit (alarm/trap status, firmware version) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S412-MIB::tempHighLevel OID value, configure state conditions and alerts, and monitor any S412 series remote monitoring/alarm unit (alarm/trap status, firmware version) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.41 | s412 | S412-MIB |
| 1.3.6.1.4.1.3052.41.4 | tempsensor | S412-MIB |
| 1.3.6.1.4.1.3052.41.4.3 | tempHighLevel | S412-MIB |