All MIBs › S412-MIB › tempAlarmEnable
tempAlarmEnable
Module: S412-MIB
OID (symbolic): S412-MIB::tempAlarmEnable
OID (numeric): 1.3.6.1.4.1.3052.41.4.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 0=alarms disabled, 1=alarms enabled
What is tempAlarmEnable?
Enables (1) or disables (0) alarm generation based on the temperature sensor. Admins disable this if no temperature sensor is physically connected, to avoid spurious alarms.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.41.4.2 snmpwalk -v2c -c public <target> S412-MIB::tempAlarmEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.41.4.2.1 snmpget -v2c -c public <target> S412-MIB::tempAlarmEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.41.4.2.1 i <value>
Start monitoring S412 series remote monitoring/alarm unit (alarm/trap status, firmware version) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S412-MIB::tempAlarmEnable OID value, configure state conditions and alerts, and monitor any S412 series remote monitoring/alarm unit (alarm/trap status, firmware version) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.41 | s412 | S412-MIB |
| 1.3.6.1.4.1.3052.41.4 | tempsensor | S412-MIB |
| 1.3.6.1.4.1.3052.41.4.2 | tempAlarmEnable | S412-MIB |