All MIBs › S412-MIB › ptSerialBaudrate
ptSerialBaudrate
Module: S412-MIB
OID (symbolic): S412-MIB::ptSerialBaudrate
OID (numeric): 1.3.6.1.4.1.3052.41.6.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 300 600 1200 2400 4800 9600 19200 baud are allowed values
What is ptSerialBaudrate?
Sets the baud rate for the unit's serial passthrough port, one of the standard values 300 through 19200. Must match the baud rate configured on the attached serial device for passthrough communication to work.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.41.6.11 snmpwalk -v2c -c public <target> S412-MIB::ptSerialBaudrate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.41.6.11.1 snmpget -v2c -c public <target> S412-MIB::ptSerialBaudrate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.41.6.11.1 i <value>
Start monitoring S412 series remote monitoring/alarm unit (alarm/trap status, firmware version) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S412-MIB::ptSerialBaudrate OID value, configure state conditions and alerts, and monitor any S412 series remote monitoring/alarm unit (alarm/trap status, firmware version) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.41 | s412 | S412-MIB |
| 1.3.6.1.4.1.3052.41.6 | passthrough | S412-MIB |
| 1.3.6.1.4.1.3052.41.6.11 | ptSerialBaudrate | S412-MIB |