All MIBs › S412-MIB › powerupTrapsend
powerupTrapsend
Module: S412-MIB
OID (symbolic): S412-MIB::powerupTrapsend
OID (numeric): 1.3.6.1.4.1.3052.41.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 0-no, 1-yes, send traps for all sensors on powerup
What is powerupTrapsend?
A 0/1 flag controlling whether the S412 sends traps for the state of all sensors when it powers up. Enabling it (1) lets an admin's NMS immediately learn the full sensor status right after a reboot rather than waiting for the next change or status interval.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.41.1.15 snmpwalk -v2c -c public <target> S412-MIB::powerupTrapsend
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.41.1.15.1 snmpget -v2c -c public <target> S412-MIB::powerupTrapsend.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.41.1.15.1 i <value>
Start monitoring S412 series remote monitoring/alarm unit (alarm/trap status, firmware version) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S412-MIB::powerupTrapsend OID value, configure state conditions and alerts, and monitor any S412 series remote monitoring/alarm unit (alarm/trap status, firmware version) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.41 | s412 | S412-MIB |
| 1.3.6.1.4.1.3052.41.1 | device | S412-MIB |
| 1.3.6.1.4.1.3052.41.1.15 | powerupTrapsend | S412-MIB |