All MIBs › S412-MIB › humidityAlarmThreshold
humidityAlarmThreshold
Module: S412-MIB
OID (symbolic): S412-MIB::humidityAlarmThreshold
OID (numeric): 1.3.6.1.4.1.3052.41.5.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Seconds must be in a range to be an alarm
What is humidityAlarmThreshold?
The number of seconds humidity must remain outside its normal range before it's reported as an alarm, used to debounce brief sensor fluctuations.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.41.5.7 snmpwalk -v2c -c public <target> S412-MIB::humidityAlarmThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.41.5.7.1 snmpget -v2c -c public <target> S412-MIB::humidityAlarmThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.41.5.7.1 i <value>
Start monitoring S412 series remote monitoring/alarm unit (alarm/trap status, firmware version) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S412-MIB::humidityAlarmThreshold OID value, configure state conditions and alerts, and monitor any S412 series remote monitoring/alarm unit (alarm/trap status, firmware version) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.41 | s412 | S412-MIB |
| 1.3.6.1.4.1.3052.41.5 | humiditysensor | S412-MIB |
| 1.3.6.1.4.1.3052.41.5.7 | humidityAlarmThreshold | S412-MIB |