All MIBs › S412-MIB › humidityAlarmEnable
humidityAlarmEnable
Module: S412-MIB
OID (symbolic): S412-MIB::humidityAlarmEnable
OID (numeric): 1.3.6.1.4.1.3052.41.5.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 0=alarms disabled, 1=alarms enabled
What is humidityAlarmEnable?
Enables (1) or disables (0) alarm generation based on the humidity sensor. Admins disable this if no humidity sensor is physically connected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.41.5.2 snmpwalk -v2c -c public <target> S412-MIB::humidityAlarmEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.41.5.2.1 snmpget -v2c -c public <target> S412-MIB::humidityAlarmEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.41.5.2.1 i <value>
Start monitoring S412 series remote monitoring/alarm unit (alarm/trap status, firmware version) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S412-MIB::humidityAlarmEnable OID value, configure state conditions and alerts, and monitor any S412 series remote monitoring/alarm unit (alarm/trap status, firmware version) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.41 | s412 | S412-MIB |
| 1.3.6.1.4.1.3052.41.5 | humiditysensor | S412-MIB |
| 1.3.6.1.4.1.3052.41.5.2 | humidityAlarmEnable | S412-MIB |