All MIBs › S412-MIB › contact1ReturnNormalTrap
contact1ReturnNormalTrap
Module: S412-MIB
OID (symbolic): S412-MIB::contact1ReturnNormalTrap
OID (numeric): 1.3.6.1.4.1.3052.41.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 0-return to normal traps not sent, 1-sent
What is contact1ReturnNormalTrap?
Controls whether the unit sends a trap when contact #1 returns to its normal (non-alarm) state: 0 suppresses it, 1 sends it. Admins enable this so the NMS is notified both when a problem starts and when it clears.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.41.2.1.6 snmpwalk -v2c -c public <target> S412-MIB::contact1ReturnNormalTrap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.41.2.1.6.1 snmpget -v2c -c public <target> S412-MIB::contact1ReturnNormalTrap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.41.2.1.6.1 i <value>
Start monitoring S412 series remote monitoring/alarm unit (alarm/trap status, firmware version) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S412-MIB::contact1ReturnNormalTrap OID value, configure state conditions and alerts, and monitor any S412 series remote monitoring/alarm unit (alarm/trap status, firmware version) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.41 | s412 | S412-MIB |
| 1.3.6.1.4.1.3052.41.2 | contacts | S412-MIB |
| 1.3.6.1.4.1.3052.41.2.1 | contact1 | S412-MIB |
| 1.3.6.1.4.1.3052.41.2.1.6 | contact1ReturnNormalTrap | S412-MIB |