All MIBs › RUCKUS-PRODUCTS-MIB › ruckusZF7761CMControlLED
ruckusZF7761CMControlLED
Module: RUCKUS-PRODUCTS-MIB
OID (symbolic): RUCKUS-PRODUCTS-MIB::ruckusZF7761CMControlLED
OID (numeric): 1.3.6.1.4.1.25053.3.1.4.7.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: ledPerCM(1): LEDs enabled per Cable Modem definition, ledPerAP(2): LEDs configured per Access Point definition, ledAlternateMode1Mode2OneHour(3): Alternalte between modes 1 and 2 at a 30 second period then disabled after one hour, ledAlternateMode1Mode2Mode6(4): Alternalte between modes 1 and 2 at a 30 second period and then go to mode 6 blueActive(5): Blue Active Surge Protection Indicator, blueActiveCMOnlineLed(6): Blue Active Surge Protection Indicator and Cable Modem online Green LED enabled, ledAllOff(7): All LEDs disabled, heartbeatOffCM(8): Disable Cable Modem heartbeat monitoring, heartbeatOffAP(9): Disable Access Point heartbeat monitoring, softResetAP(10): Soft reset of Access Point, powerCycleAP(11): Power cycle Access Point, factoryResetAP(12): Reset Access Point to factory defaults, softResetCM(13): Soft reset of Cable Modem, powerCycleCM(14): Power cycle Cable Modem, factoryResetCM(15): Reset Cable Modem to factory defaults
What is ruckusZF7761CMControlLED?
Selects one of fifteen LED and control modes for the ZF7761CM outdoor AP/cable-modem combo unit -- most values (ledPerCM, ledPerAP, blueActive, etc.) just change LED behavior, but several double as remote maintenance actions like softResetAP(10), powerCycleCM(14), or factoryResetCM(15), so setting this OID can actually reboot or factory-reset the device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25053.3.1.4.7.3 snmpwalk -v2c -c public <target> RUCKUS-PRODUCTS-MIB::ruckusZF7761CMControlLED
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25053.3.1.4.7.3.1 snmpget -v2c -c public <target> RUCKUS-PRODUCTS-MIB::ruckusZF7761CMControlLED.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25053.3.1.4.7.3.1 i <value>
Start monitoring Ruckus wireless router/gateway (ZoneFlex), Ruckus ZoneDirector WLAN controller, access point (product identity/config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RUCKUS-PRODUCTS-MIB::ruckusZF7761CMControlLED OID value, configure state conditions and alerts, and monitor any Ruckus wireless router/gateway (ZoneFlex), Ruckus ZoneDirector WLAN controller, access point (product identity/config) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25053 | ruckusRootMIB | RUCKUS-ROOT-MIB |
| 1.3.6.1.4.1.25053.3 | ruckusProducts | RUCKUS-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25053.3.1 | ruckusProductsMIB | RUCKUS-PRODUCTS-MIB |
| 1.3.6.1.4.1.25053.3.1.4 | ruckusWirelessHotzoneProducts | RUCKUS-PRODUCTS-MIB |
| 1.3.6.1.4.1.25053.3.1.4.7 | ruckusZF7761CM | RUCKUS-PRODUCTS-MIB |
| 1.3.6.1.4.1.25053.3.1.4.7.3 | ruckusZF7761CMControlLED | RUCKUS-PRODUCTS-MIB |