All MIBs › RPHY-NDF-NDR-MIB › docsRphyRpdDevNdrPowerAdjust
docsRphyRpdDevNdrPowerAdjust
Module: RPHY-NDF-NDR-MIB
OID (symbolic): RPHY-NDF-NDR-MIB::docsRphyRpdDevNdrPowerAdjust
OID (numeric): 1.3.6.1.4.1.9.9.857.1.2.1.12
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This attribute represents the desired target receive power level adjust for the selected NDR channel from the base target power reference level specified for the corresponding US RF port. The value represents power spectral density and is specified in units of TenthdB per 1.6 MHz of equivalent RF spectrum. The channel’s target receive power is computed by adding the value of this attribute to the value of base target power reference level for the corresponding RF port. This object specifies the commanded input power level for the NDR channel as specified in [R-OOB].
What is docsRphyRpdDevNdrPowerAdjust?
Target receive power adjustment, in tenths of a dB per 1.6 MHz, for this NDR channel relative to the base target power reference level of its upstream RF port; the RPD's actual target receive power is this value added to that base reference.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.857.1.2.1.12 snmpwalk -v2c -c public <target> RPHY-NDF-NDR-MIB::docsRphyRpdDevNdrPowerAdjust
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.857.1.2.1.12.1 snmpget -v2c -c public <target> RPHY-NDF-NDR-MIB::docsRphyRpdDevNdrPowerAdjust.1
Start monitoring Cisco Remote PHY Device (RPD), DOCSIS Remote PHY node/fiber node (channel/session configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RPHY-NDF-NDR-MIB::docsRphyRpdDevNdrPowerAdjust OID value, configure state conditions and alerts, and monitor any Cisco Remote PHY Device (RPD), DOCSIS Remote PHY node/fiber node (channel/session configuration) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.857 | rphyNdfNdrMIB | RPHY-NDF-NDR-MIB |
| 1.3.6.1.4.1.9.9.857.1 | rphyNdfNdrMIBObjects | RPHY-NDF-NDR-MIB |
| 1.3.6.1.4.1.9.9.857.1.2 | docsRphyRpdDevNdrCfgTable | RPHY-NDF-NDR-MIB |
| 1.3.6.1.4.1.9.9.857.1.2.1 | docsRphyRpdDevNdrCfgEntry | RPHY-NDF-NDR-MIB |
| 1.3.6.1.4.1.9.9.857.1.2.1.12 | docsRphyRpdDevNdrPowerAdjust | RPHY-NDF-NDR-MIB |