All MIBs › RLE-FALCON-MIB › falconInput4RlyControl
falconInput4RlyControl
Module: RLE-FALCON-MIB
OID (symbolic): RLE-FALCON-MIB::falconInput4RlyControl
OID (numeric): 1.3.6.1.4.1.3184.1.1.1.3.4.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2 on a high alarm, set the 2nd bit (2). To set K1 on a low alarm, set the 3rd bit (4). To set K2 on a low alarm, set the 4th bit (8). To set K1 on a digital alarm, set the 1st bit (1). To set K2 on a digital alarm, set the 2nd bit (2). For no action. set this value to 0. The range of this setting is 0..15. This variable is stored in non-volatile memory.
What is falconInput4RlyControl?
Read-write bitmask (0-15) mapping Input 4's alarm conditions to the two output relays K1/K2: bit 1 fires K1 and bit 2 fires K2 on a high alarm (also used for a digital alarm), while bit 4 fires K1 and bit 8 fires K2 on a low alarm; an admin ORs together the bits needed (e.g. 3 to trigger both relays on a high alarm) or sets 0 for no relay action, e.g. wiring Input 4's high-temperature alarm to also energize a cooling-fan relay.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3184.1.1.1.3.4.11 snmpwalk -v2c -c public <target> RLE-FALCON-MIB::falconInput4RlyControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3184.1.1.1.3.4.11.1 snmpget -v2c -c public <target> RLE-FALCON-MIB::falconInput4RlyControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3184.1.1.1.3.4.11.1 i <value>
Start monitoring RLE Technologies Falcon environmental monitoring unit, data center/telecom rack controllers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RLE-FALCON-MIB::falconInput4RlyControl OID value, configure state conditions and alerts, and monitor any RLE Technologies Falcon environmental monitoring unit, data center/telecom rack controllers from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3184 | rle | RLE-FALCON-MIB |
| 1.3.6.1.4.1.3184.1 | products | RLE-FALCON-MIB |
| 1.3.6.1.4.1.3184.1.1 | falcon | RLE-FALCON-MIB |
| 1.3.6.1.4.1.3184.1.1.1 | falconMIB | RLE-FALCON-MIB |
| 1.3.6.1.4.1.3184.1.1.1.3 | falconInputs | RLE-FALCON-MIB |
| 1.3.6.1.4.1.3184.1.1.1.3.4 | falconInput4 | RLE-FALCON-MIB |
| 1.3.6.1.4.1.3184.1.1.1.3.4.11 | falconInput4RlyControl | RLE-FALCON-MIB |