All MIBs › RLE-FALCON-MIB › falconInput15RlyControl
falconInput15RlyControl
Module: RLE-FALCON-MIB
OID (symbolic): RLE-FALCON-MIB::falconInput15RlyControl
OID (numeric): 1.3.6.1.4.1.3184.1.1.1.3.31.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2 on a high alarm, set the 2nd bit (2). To set K1 on a low alarm, set the 3rd bit (4). To set K2 on a low alarm, set the 4th bit (8). To set K1 on a digital alarm, set the 1st bit (1). To set K2 on a digital alarm, set the 2nd bit (2). For no action. set this value to 0. The range of this setting is 0..15. This variable is stored in non-volatile memory.
What is falconInput15RlyControl?
Read-write bitmask (0-15) mapping Input 15's digital alarm to the two output relays K1/K2: bit 1 fires K1 and bit 2 fires K2 when Input 15 goes into alarm, with 0 meaning no relay action; an admin uses this to, say, have a triggered door-contact alarm on Input 15 also energize a strobe-light relay.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3184.1.1.1.3.31.4 snmpwalk -v2c -c public <target> RLE-FALCON-MIB::falconInput15RlyControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3184.1.1.1.3.31.4.1 snmpget -v2c -c public <target> RLE-FALCON-MIB::falconInput15RlyControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3184.1.1.1.3.31.4.1 i <value>
Start monitoring RLE Technologies Falcon environmental monitoring unit, data center/telecom rack controllers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RLE-FALCON-MIB::falconInput15RlyControl OID value, configure state conditions and alerts, and monitor any RLE Technologies Falcon environmental monitoring unit, data center/telecom rack controllers from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3184 | rle | RLE-FALCON-MIB |
| 1.3.6.1.4.1.3184.1 | products | RLE-FALCON-MIB |
| 1.3.6.1.4.1.3184.1.1 | falcon | RLE-FALCON-MIB |
| 1.3.6.1.4.1.3184.1.1.1 | falconMIB | RLE-FALCON-MIB |
| 1.3.6.1.4.1.3184.1.1.1.3 | falconInputs | RLE-FALCON-MIB |
| 1.3.6.1.4.1.3184.1.1.1.3.31 | falconInput15 | RLE-FALCON-MIB |
| 1.3.6.1.4.1.3184.1.1.1.3.31.4 | falconInput15RlyControl | RLE-FALCON-MIB |