All MIBs › RIVERSTONE-IF-MIB › rsIfInCorrelatedLayer1Errors
rsIfInCorrelatedLayer1Errors
Module: RIVERSTONE-IF-MIB
OID (symbolic): RIVERSTONE-IF-MIB::rsIfInCorrelatedLayer1Errors
OID (numeric): 1.3.6.1.4.1.5567.2.60.1.1.1.9
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The number of frames in error due to physical signal degradation.
This counter is a close approximation of the actual number of frames dropped due to layer 1 errors.
An empirical experiment was done to correlate the registers to the actual frames dropped in a controlled environment that simulates physical signal degradation.
On the RS platform, a number of hardware registers were identified that approximate the actual number of frames dropped. The registers would be different for the different interfaces on the RS platform.
Usually on WAN interface, this counter is not supported. Refer to the value of rsIfStatsCapability to determine if this interface supports this counter.
What is rsIfInCorrelatedLayer1Errors?
An approximate count of frames dropped due to physical-layer signal degradation, derived from hardware registers correlated empirically to actual drops; usually unsupported on WAN interfaces, so an admin should check rsIfStatsCapability before relying on it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5567.2.60.1.1.1.9 snmpwalk -v2c -c public <target> RIVERSTONE-IF-MIB::rsIfInCorrelatedLayer1Errors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5567.2.60.1.1.1.9.1 snmpget -v2c -c public <target> RIVERSTONE-IF-MIB::rsIfInCorrelatedLayer1Errors.1
Start monitoring Riverstone Networks router/switch (extended interface uptime/flap/Layer-1 error counters) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RIVERSTONE-IF-MIB::rsIfInCorrelatedLayer1Errors OID value, configure state conditions and alerts, and monitor any Riverstone Networks router/switch (extended interface uptime/flap/Layer-1 error counters) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5567 | riverstoneNetworks | RIVERSTONE-SMI-MIB |
| 1.3.6.1.4.1.5567.2 | riverstoneMibs | RIVERSTONE-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5567.2.60 | rsIfMIB | RIVERSTONE-IF-MIB |
| 1.3.6.1.4.1.5567.2.60.1 | rsIfMIBObjects | RIVERSTONE-IF-MIB |
| 1.3.6.1.4.1.5567.2.60.1.1 | rsIfStatsTable | RIVERSTONE-IF-MIB |
| 1.3.6.1.4.1.5567.2.60.1.1.1 | rsIfStatsEntry | RIVERSTONE-IF-MIB |
| 1.3.6.1.4.1.5567.2.60.1.1.1.9 | rsIfInCorrelatedLayer1Errors | RIVERSTONE-IF-MIB |